1. Home >
  2. FAQ


  Key word
    * You can refine your search by selecting the category on the right.
* When entering multiple key words, put a space in between.


FAQ concerning MONITOUCH V9 series
Key word : There is no specification.
Corresponding FAQ is 99

No.Question
1 Q1. The POWER LED does not light up or flashes.
2 Q2. The V series does not switch from the RUN screen to Local mode.
3 Q3. Overlap editing is disabled.
4 Q4. When a screen with an overlap display is switched to another and is switched back, the overlap part disappears.
5 Q5. Pressing a switch does not activate anything.
6 Q6. The lamp lights up even though the bit in the lamp device memory is not ON.
7 Q7. Pressing the touch switch activates nothing or activates a position that deviates from the switch.
8 Q8. Characters are not displayed in character display parts as intended.
9 Q9. Cannot make entries with a keypad.
10 Q10. Negative values or decimal fractions cannot be entered with a keypad.
11 Q11. The graph of a trend part ([Display Mode: Real Time Display]) is not displayed.
12 Q12. The data for a trend part ([Display Mode: Real Time Display]) differs from the latest data in the PLC.
13 Q13. Messages are not displayed in the alarm tracking display.
14 Q14. Pressing the reset switch does not clear history data.
15 Q15. Alarms are not saved in the alarm history as specified for [Number of Data to Save] in the alarm server settings.
16 Q16. The V series does not recognize the storage device.
17 Q17. The time and date is not displayed correctly.
18 Q18. A screen in multiple languages is created; however, the displayed language cannot be switched.
19 Q19. Ladder transfer cannot be performed properly.
20 Q1. How long will the backlight last?
21 Q2. Is the backlight replaceable?
22 Q3. How long will the battery last?
23 Q4. Required operating system and environment for configuration software "V-SFT-6"
24 Q1. What PLC models can be connected?
25 Q2. What temperature controller / inverter models can be connected?
26 Q3. What printers are available?
27 Q4. What barcode readers are available?
28 Q5. What SD cards and USB flash drives are compatible with the V9 series?
29 Q1. Communication Error "Timeout"
30 Q2. Communication Error "Error code received"
31 Q3. Communication Error "Simulator: Timeout", "Simulator: Link down"
32 Q4. Screen Program Error "Error : XX (XX : XXX)"
33 Q5. Setup Error
34 Q6. "Insert Storage in V9"
35 Q7. "Battery changeover required"
36 Q8. "Receive timeout"
37 Q9. "The port cannot be opened."
38 Q10. "The size is too large to communicate."
39 Q11. "It is not possible to open this file because there is a function that is not able to use."
40 Q12. "Import file is not selected"
41 Q13. The PLC device memory address for a part is garbled as "??" or is "blank".
42 Q14. "Editor is occupied by another port"
43 Q1 How to make the screen dark when it is left untouched for a preset time  
44 Q2 How to sound a buzzer according to a command from the PLC (external)
45 Q3 How to adjust the brightness of the screen
46 Q4 How to change-over the screen according to a PLC (external) command
47 Q5 How to check the number of the screen currently displayed
48 Q6 How to indicate battery trouble of the V series on the PLC side
49 Q7 How to display the PC screen on the V series
50 Q8 How to copy a screen from one file to another
51 Q9 How to paste an image of the created screen into another application   like Microsoft Word
52 Q10 How to print screen images with device memory addresses displayed on   switches, etc.
53 Q11 How to search for device memory addresses specified for items used on the screen
54 Q12 How to find or replace text used in screen data  
55 Q13 How to change the design of a part placed on the screen
56 Q14 How to display overlap parts from the PLC (external)    
57 Q15 How to disable switches on the base screen and other overlap parts while
an overlap part is displayed
58 Q16 How to hide overlap parts from the screen while editing the base screen
59 Q17 How to overlay one switch on another on the screen
60 Q18 How to assign a function to each function switch
61 Q19 How to make a switch work only when the switch is held down
62 Q20 How to configure two-point pressing
63 Q21 How to provide a numerical data entry feature using a keypad
64 Q22 How to limit the values that can be entered through the keypad
65 Q23 How to designate entry targets in which data can be entered
66 Q24 How to display multiple trend parts in asynchrony
67 Q25 How to draw reference lines for a trend graph part
68 Q26 How to save logging data even after turning off power to the V series
69 Q27 How to save logging data to a file
70 Q28 How to save logging data to files according to date
71 Q29 How to give headings to logging data output to CSV files
72 Q30 How to check whether or not a storage is recognized
73 Q31 How to store screen data in a storage device
74 Q32 How to read data from a storage device that is inserted in the V series
75 Q33 How to set (correct) the calendar
76 Q34 How to display screens in foreign languages
77 Q35 How to check the communication condition between the temperature   controller and the V series 
78 Q36 How to read or write data between the temperature controller/inverter and   the PLC device memory or internal device memory at regular intervals 
79 Q37 How to connect two temperature controllers/inverters from different manufacturers
80 Q38 How to assign a function to each function switch
81 Q39 How to check the operation of screens without connecting to a PLC  
82 Q40 How to check operation of the V9 series from the PC
83 Q41 How to replace a discontinued V/GD series unit with a V9 series unit
84 Q42 How to change setting for the backlight
85 Q43 How to change setting for buzzer
86 Q44 How to change communication setting such as [Signal Level] and [Baud Rate]
87 Q45 How to prohibit setting changes in Local mode
88 Q5. Which models are equipped with wireless LAN access point?
89 Q6. Which models are compliant with UL standards?
90 Q7. Which models are compliant with NEMA standards?
91 Q8. What standards is V9 series compliant with?
92 Q46 How to specify the number of the initial screen upon powering-on
93 Q47 How to change the start-up screen (splash screen)
94 Q48 How to update the operating system for the V9 series unit
95 Q49 How to remove storage devices safely from the V9 series unit
96 Q9. Which model comply with marine approvals?
97 Q10. How far is it possible to communicate wirelessly?
98 Q11. What is the model name of a replacement battery?
99 Q12. How do you install or update configuration software "V-SFT-6"?
 
ΔTop