1. Home >
  2. FAQ

  Key word
    * You can refine your search by selecting the category on the right.
* When entering multiple key words, put a space in between.

FAQ concerning MONITOUCH V9 series > Questions about:
Key word : There is no specification.
Corresponding FAQ is 49

1 Q1 How to make the screen dark when it is left untouched for a preset time  
2 Q2 How to sound a buzzer according to a command from the PLC (external)
3 Q3 How to adjust the brightness of the screen
4 Q4 How to change-over the screen according to a PLC (external) command
5 Q5 How to check the number of the screen currently displayed
6 Q6 How to indicate battery trouble of the V series on the PLC side
7 Q7 How to display the PC screen on the V series
8 Q8 How to copy a screen from one file to another
9 Q9 How to paste an image of the created screen into another application   like Microsoft Word
10 Q10 How to print screen images with device memory addresses displayed on   switches, etc.
11 Q11 How to search for device memory addresses specified for items used on the screen
12 Q12 How to find or replace text used in screen data  
13 Q13 How to change the design of a part placed on the screen
14 Q14 How to display overlap parts from the PLC (external)    
15 Q15 How to disable switches on the base screen and other overlap parts while
an overlap part is displayed
16 Q16 How to hide overlap parts from the screen while editing the base screen
17 Q17 How to overlay one switch on another on the screen
18 Q18 How to assign a function to each function switch
19 Q19 How to make a switch work only when the switch is held down
20 Q20 How to configure two-point pressing
21 Q21 How to provide a numerical data entry feature using a keypad
22 Q22 How to limit the values that can be entered through the keypad
23 Q23 How to designate entry targets in which data can be entered
24 Q24 How to display multiple trend parts in asynchrony
25 Q25 How to draw reference lines for a trend graph part
26 Q26 How to save logging data even after turning off power to the V series
27 Q27 How to save logging data to a file
28 Q28 How to save logging data to files according to date
29 Q29 How to give headings to logging data output to CSV files
30 Q30 How to check whether or not a storage is recognized
31 Q31 How to store screen data in a storage device
32 Q32 How to read data from a storage device that is inserted in the V series
33 Q33 How to set (correct) the calendar
34 Q34 How to display screens in foreign languages
35 Q35 How to check the communication condition between the temperature   controller and the V series 
36 Q36 How to read or write data between the temperature controller/inverter and   the PLC device memory or internal device memory at regular intervals 
37 Q37 How to connect two temperature controllers/inverters from different manufacturers
38 Q38 How to assign a function to each function switch
39 Q39 How to check the operation of screens without connecting to a PLC  
40 Q40 How to check operation of the V9 series from the PC
41 Q41 How to replace a discontinued V/GD series unit with a V9 series unit
42 Q42 How to change setting for the backlight
43 Q43 How to change setting for buzzer
44 Q44 How to change communication setting such as [Signal Level] and [Baud Rate]
45 Q45 How to prohibit setting changes in Local mode
46 Q46 How to specify the number of the initial screen upon powering-on
47 Q47 How to change the start-up screen (splash screen)
48 Q48 How to update the operating system for the V9 series unit
49 Q49 How to remove storage devices safely from the V9 series unit