1. Home >
  2. Support >
  3. Record of V-SFT-5 version updates

Record of V-SFT-5 version updates

Feb 2017 Ver. 5.4.42.0
V8 series SYS PROG: version V2.210
TS2000 series SYS PROG: version V2.210
TS1000 series SYS PROG: version V2.210
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8 / TS2000 / TS1000 series : PLCs newly supported.
・ OMRON NJ Series (EtherNet/IP) supported.
・ Yaskawa MP3000 Series supported.
・ KEYENCE KZ/KV series CPU supported.
・ JTEKT TOYOPUC-Nano (Ethernet) supported.
・ RKC REX-F9000 (Standard Protocol) supported.
・ Siemens S120 (Ethernet ISOTCP) supported.
・ DELTA DVP-SE (MODBUS ASCII) supported.
・ DELTA DVP-SE (MODBUS TCP/IP) supported.
・ FESTO FEC supported.

V8 / TS2000 / TS1000 series : Function extended.
・ Modbus slave (RTU) - Broadcast function supported (station #0).
・ Modbus slave - RS422 (4-wire system) supported(Transmission mode: 2-wire/4-wire is selectable).
・ SAIA PCD Transmission mode: Data Mode/Parity Mode is selectable.

Windows 10 (32bit/64bit) supported.

TS2060 supported.
Apr 2016 Ver. 5.4.41.0
V8 series SYS PROG: version V2.150
TS series SYS PROG: version V2.150
S806 series SYS PROG: version V2.150
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8 series : PLCs newly supported.
・ YASKAWA MP3000 series (Ethernet UDP/IP) supported.
・ A&D AD4402(MODBUS RTU) supported.
・ A&D AD4404(MODBUS RTU) supported.
・ FUJI FRENIC-Mini(MODBUS RTU)(C2) supported.
・ FUJI FRENIC series(CPU) supported.
・ FUJI FRENIC series(CPU) PLC Ladder transfer function added.
・ FATEK AUTOMATION FACON FB series PLC Ladder transfer function added.
・ KEYENCE KZ24/300 CPU supported.
・ Lenze Servo Drive 9400 (Ethernet TCP/IP) supported.
・ YASKAWA MP3000 series EXPANSION MEMOBUS (Ethernet) supported.
・ FUJI FRENIC-Ace (MODBUS RTU) supprted.
・ YOKOGAWA UT32A/35A (MODBUS RTU) supprted.
・ YOKOGAWA UT52A/55A (MODBUS RTU) supprted.
・ YOKOGAWA UT75A (MODBUS RTU) supprted.

V8 series:HEX designation for bit device of Mitsubishi PLC device supported.

V8 series:GU-01/10/11 revised hardware supported.

Editor:Symbol import for Siemens TIA Portal supported.
Oct 2015 Ver. 5.4.40.0
V8 series SYS PROG: version V2.130
TS series SYS PROG: version V2.130
S806 series SYS PROG: version V2.130
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8 series : PLCs newly supported.
・ MITSUBISHI FX5U/5UC series CPU supported.
・ MITSUBISHI FX5U/5UC series (Ethernet) supported.
・ MITSUBISHI FX3U/3GE series (Ethernet) supported.
・ MITSUBISHI L series CPU supported.
・ MITSUBISHI iQ-R series link supported.
・ MITSUBISHI iQ-R series (Built-in Ethernet) supported.
・ MITSUBISHI iQ-R series (Ethernet) supported.
・ OMRON V680S (Ethernet TCP/IP) supported.
・ KEYENCE KV-7000 (Ethernet TCP/IP) supported.
・ FUJI PXF (MODBUS RTU) supported.
・ FUJI FRENIC-VG1(MODBUS RTU) supported.
・ FUJI HFR-K1K supported.
・ YOKOGAWAμR10000/20000 (Ethernet TCP/IP) supported.
・ Azbil SDC15 supported.
・ Azbil SDC25/26 supported.
・ Azbil SDC45/46 supported.
・ Siemens S7-1200/1500 (Ethernet ISOTCP) supported.
・ RS Automation CSD5 (MODBUS RTU) supported.

V8 series : The connection device specification extended.
・ FUJI ALPHA5(MODBUS RTU) : The communication setting extended.
・ WAGO 750 series : %MW address extended.
・ BECKHOFF ADS Protocol(Ethernet) : Port extended.
・ Universal serial : The communication point of the write command WM and WC extended.

V7 series : PLCs newly supported.
・MITSUBISHI QnU series CPU supported.

Editor: Display addresses with zero supless supported.
Ladder transfer tool: Flow control supported.
Feb 2015 Ver. 5.4.39.0
V8 series SYS PROG: version V2.090
TS series SYS PROG: version V2.090
S806 series SYS PROG: version V2.090
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8: System Program fixed.

Jan 2015 Ver. 5.4.38.0
V8 series SYS PROG: version V2.080
TS series SYS PROG: version V2.080
S806 series SYS PROG: version V2.080
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

PLCs newly supported.
・ Modbus slave(ASCII) connection supported.
・ TOSHIBA VF-S15 connection supported.
・ TOSHIBA VF-MB1 connection supported.
・ TOSHIBA VF-nC3 connection supported.
・ Allen-Bradley Micro800 Controllers connection supported.
・ Allen-Bradley Micro800 Controllers(Ethernet TCP/IP) connection supported.
・ Delta DVP series Multi-link2 Ethernet connection supported.
・ Allen-Bradley Micro800 Controllers(Ethernet TCP/IP) connection supported.

Oct 2014 Ver. 5.4.37.0
V8 series SYS PROG: version V2.060
TS series SYS PROG: version V2.060
S806 series SYS PROG: version V2.060
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8 series: PLCs newly supported.
・ HYUNDAI: Hi4Robot(MODBUS RTU)
・ HYUNDAI: Hi5Robot(MODBUS RTU)

V-SFT-5: Prohibiting screen upload supported with TS.
TS series: Chinese simplified supported with operation log viewer.
V8/TS series: Multi-link2 connection with V9 series supported.
V-SFT-5: Windows 8.1 supported.
Aug-1 Ver. 5.4.36.0
V8 series SYS PROG: version V2.050
TS series SYS PROG: version V2.050
S806 series SYS PROG: version V2.050
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8: System Program fixed.

Jul-1 Ver. 5.4.35.0
V8 series SYS PROG: version V2.040
TS series SYS PROG: version V2.040
S806 series SYS PROG: version V2.040
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8 series: PLCs newly supported.
・ CIMON:S series supported.
・ CIMON:S series(Ethernet) supported.
・ JTEKT:TOYOPUC-Plus supported.
・ JTEKT:TOYOPUC-Plus supported.

V-SFT-5: Buffering area setting supported copy and paste function.

Apr-4 Ver. 5.4.34.0
V8 series SYS PROG: version V2.030
TS series SYS PROG: version V2.030
S806 series SYS PROG: version V2.000
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940

V8 series: PLCs newly supported.
・ FUJI WSZ series (Ethernet) supported.
・ ULVAC G-TRAN supported.
・ MITSUBISHI Q170MSCPU-S1 supported.
・ MITSUBISHI Q170MSCPU-S1 (Ethernet) supported.

Jan-10 Ver. 5.4.33.0
V8 series SYS PROG: version V2.000
TS series SYS PROG: version V2.000
S806 series SYS PROG: version V2.000
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ LS:MASTER-K series (Ethernet) supported.
・ YOKOGAWA Monitor command supported with Ethernet connection.
・ TOSHIBA nv series(Ethernet UDP/IP)
・ TOSHIBA T series/V series [T compatible](Ethernet UDP/IP) supported.
・ FUJI Micrex SX Micrex F compatible (BCD with sign) supported.
V-SFT-5: Multi language sheet supported Vietnamese and Thai.
Oct-31 Ver. 5.4.32.0
V8 series SYS PROG: version V2.000
TS series SYS PROG: version V2.000
S806 series SYS PROG: version V2.000
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
PLC Ladder transfer function added:・ Simens S7-300/400 MPI
Oct-13 Ver. 5.4.31.0
V8 series SYS PROG: version V1.990
TS series SYS PROG: version V1.990
S806 series SYS PROG: version V1.920
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ FUJI MICREX-SX SPM/SPE supported.
・ FUJI F□JF-R series supported.
・ FUJI MICREX-SX SPH3000MM supported.
・ FUJI F-MPC04E supported.
・ MITSUBISHI L series(Built-in Ethernet)SPU device supproted.
・ UNIPULSE F805A supported.
・ SUS XA-A* supported.
・ SAMSUNG SPC series supported.
・ Panasonic FP7 supported.
・ Panasonic FP7(Ethernet) supported.
TECHNOSHOT series: Trial period setting and upload prohibit setting added.
TECHNOSHOT series: Smooth Font supported.
V8 series: Alarm tracking: Acknowledge function extended.
V8 series: Switch: Repeat speed of calculation switch improved.
V8 series: Panasonic Network camera BB-HCM7xx series supported
V-SFT-5: Batch Change memory: Copy & Paste from Excel sheet supported (Mitsubishi PLC only).
V-SFT-5: Batch export/import of multi-language added.
V-SFT-5: List of the 3D bitmap area added.
V-SFT-5: Copy and Paste of [Multi-language] window added.

Jun-13 Ver. 5.4.30.0
V8 series SYS PROG: version V1.950
TS series SYS PROG: version V1.950
S806 series SYS PROG: version V1.920
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ Ultra Instruments UIC CPU(MODBUS ASCII) supported.
・ MITUBISHI Q series Multi-link2 Ethernet supported.

May-13 Ver. 5.4.29.0
V8 series SYS PROG: version V1.950
TS series SYS PROG: version V1.950
S806 series SYS PROG: version V1.920
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V-SFT-5:Include all the parts files as a standard part packaging.

Apr-13 Ver. 5.4.28.0
V8 series SYS PROG: version V1.950
TS series SYS PROG: version V1.950
S806 series SYS PROG: version V1.920
V7 series SYS PROG: version V1.930
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ KEYENCE KZ series supported.
・ RS Automation X8 series supported.
・ RS Automation X8 series(Ethernet) supported.
・ KOGANEI IBFL-TC supported.
・ MODBUS ASCII supported.
・ YOKOGAWA FA-M3V supported.
・ YOKOGAWA FA-M3V(Ethernet) supported.
・ YOKOGAWA FA-M3V(Ethernet ASCII) supported.
・ XINJE XC series(MODBUS RTU) supported.
TECHNOSHOT supported.
PLC Ladder transfer function added:
・ Simens S7-200 PPI
V8 series: Change in Language menu on the Main Menu screen.
V8 series:Switch to Main Menu function added.
V-SFT-5: Windows8 32bit/64bit supported.
V-SFT-5: USB driver auto-installation supported.
V-SFT-5: Extended 3D parts included as standard parts files.

Jan-13 Ver. 5.4.27.0
V8 series SYS PROG: version V1.920
S806 series SYS PROG: version V1.920
V7 series SYS PROG: version V1.920
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ Asahi Engineering Micro step driver D4730S supported.
・ OMRON E5CK-T supported.
・ Allen-Bradley CompactLogix L27ERM supported.
・ MITSUBISHI QnU series CPU Higher rank model supported.
・ Panasonic KW Series supported.
・ FUJI FRENIC-HVAC/AQUA(MODBUS RTU) supported.
・ OMRON PLC Multi Link2 compatible with V7 supported.
V8 series:Trend Graph/Trend Sampling Function extended.
V8 series:Language changeover function added to switch.
V8 series:Siemens: Filter Import Function of DB(Data Block) supported.
V8 series:Allen-Bradley: User Defined Tag Import Function supported.

Nov-12 Ver. 5.4.26.0
V8 series SYS PROG: version V1.890
S806 series SYS PROG: version V1.900
V7 series SYS PROG: version V1.920
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
S806C: System Program fixed.

Oct-12 Ver. 5.4.25.0
V8 series SYS PROG: version V1.890
V7 series SYS PROG: version V1.920
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ Pnasonic MINAS A4 series supported.
・ CHINO LT-400 Series supported.
・ OMRON E5AK-T supported.
・ FUJI WE1MA(Ver.B)(MODBUS RTU) supported.
・ DeviceNet supported.
・ KEYENCE KV3000 Multi-link2 with V7/V6-V8 supported.
FUJI ELECTRIC :
・ Memory Conversion for when changing PLC model from MICREX-F to MICREX-SX supported.
MITSUBISHI :
・ Tag Import function supported for the variable name CSV file exported by GX works2.
V8 Series : Recipe mode Filename Sorting function supported.

Jul-12 Ver. 5.4.24.0
V8 series SYS PROG: version V1.830
V7 series SYS PROG: version V1.920
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ Siemens TI500/505 supported.
・ Siemens TI500/505 V4 Compatible supported.
・ YAMATAKE MX series supported.
・ Allen-Bradley PLC-5(Ethernet) supported.
・ Orientalmotor High-efficiency AR Series(MODBUS RTU) supported.
・ Orientalmotor CRK Series(MODBUS RTU) supported.
・ RS OEMax NX700 Series(Ethernet) supported.
・ JTEKT TOYOPUC(Ethernet PC10Mode) supported.
・ SUNX LP-400 Supported commands extended.
V-SFT-5:Siemens: Tag Import Function supported.
V8 series:CC-Link Ver.2 supported.
Banner network camera supported.
Trend Function extended.
Mitsubishi: Ladder Monitor Function extended.
V810C: V609E compatible display function added. (128-color only).

Apr-12 Ver. 5.4.23.0
V8 series SYS PROG: version V1.790
V7 series SYS PROG: version V1.920
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ MITSUBISHI A link+Net10 supported.
・ MITSUBISHI A series (OPCN-1) supported.
・ OMRON SYSMAC C(OPCN-1) supported.
・ FUJI ALPHA5 Smart(MODBUS RTU) supported.
・ FUJI FePSU Breaker supported.
・ FUJI FRENIC-MEGA SERVO(MODBUS RTU) supported.
・ Siemens S5(PG port) supported.
・ SHINKO TECHNOS ACD/ACR Series supported.
・ SHINKO TECHNOS ACS-13A supported.
・ SHINKO TECHNOS PC-900 supported.
・ SHINKO TECHNOS PCD-33A supported.
・ SHINKO TECHNOS WCL-13A supported.
・ SHINKO TECHNOS GC Series supported.
・ LS XGT/XGI series CPU supported.
・ LS XGT/XGK series (Ethernet) supported.
・ LS GLOFA GM7 CNET supported.
・ GE Fanuc 90 series (SNP) supported.
・ GE-Faunc RX3i(Ethernet TCP/IP) supported.
・ FUFENG APC Series Controller supported.
MITSUBISHI PLC: KeepAlive supported.
OMRON PLC: KeepAlive supported.
V8 series: Japanese Conversion Function(FEP) extended.
V8 series: YOKOGAWA Ladder Monitor: Device Searching Function extended.
V8 series: YOKOGAWA Ladder Monitor: Function Block Switching extended.
V8 series: Modbus Slave (TCP/IP): The maximum of master devices expanded to 16.
V8 series: OMRON Ladder Monitor: CJ2 supported.
V-SFT-5: Text Search and Replacement Function added.
LadderComOp: Windows Vista/7 supported.

Jan-12 Ver. 5.4.22.0
V8 series SYS PROG: version V1.750
V7 series SYS PROG: version V1.920
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ OMRON E5CN-HT supported.
・ TOSHIBA MACHINE TC200 Device added.
・ VIGOR M series supported.
・ LS XGT/XGI series supported.
・ LS XGT/XGI series (Ethernet) supported.
・ YOKOGAWA FA-M3/FA-M3R(Ethernet UDP/IP ASCII) supported.
・ YOKOGAWA FA-M3/FA-M3R(Ethernet TCP/IP ASCII) supported.
V808C portrait orientation supported.
V-SFT-5: Filtering function for project view added.
V-SFT-5: Numerical data display parts on the panel meter change function added.

Oct-11 Ver. 5.4.21.0
V8 series SYS PROG: version V1.720
V7 series SYS PROG: version V1.910
V6 series SYS PROG: version V1.930
V606e series SYS PROG: versionV1.940
V8 series: PLCs newly supported.
・ FUJI WSZ series supported.
・ MITSUBISHI Q170MCPU (multi CPU) supported.
・ MITSUBISHI Q170MCPU (multi CPU) (Ethernet) supported.
・ Siemens S7-200(Ethernet ISOTCP) supported.
V8 series:
・ Macro command search function added
・ Panel meter functions available with 128 colors , 256 colors and monochrome type
・ E-mail port No. change function added
・ RGB (input) display compatible with V7
・ V8 series: Windows font size in points available up to 999

Jul-11 Ver. 5.4.20.0
V8 series SYS PROG: version V1.680
V7 series SYS PROG: version V1.910
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V7 series: System Program fixed
・Please refer to Improvement Information for further information.

Jun-11 Ver. 5.4.19.0
V8 series SYS PROG: version V1.680
V7 series SYS PROG: version V1.900
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V-SFT-5: Failure fixed

Apr-11 Ver. 5.4.18.0
V8 series SYS PROG: version V1.670
V7 series SYS PROG: version V1.890
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ YAMATAKE DMC50(COM) C Device supported.
・ DELTA TAU DATA SYSTEMS PMAC P_INT Device supported.
・ DELTA TAU DATA SYSTEMS PMAC(Ethernet TCP/IP) P_INT Device supported.
・ YOKOGAWA FA-M3 SW/SL Extended Command supported.
・ YOKOGAWA FA-M3R SW/SL Extended Command supported.
・ YOKOGAWA FA-M3/FA-M3R(Ethernet UDP/IP) SW/SL/F Extended Command supported.
・ YOKOGAWA FA-M3/FA-M3R(Ethernet TCP/IP) SW/SL/F Extended Command supported.
・ YOKOGAWA FA-M3/FA-M3R(Ethernet UDP/IP) System-log read command supported.
・ YOKOGAWA FA-M3/FA-M3R(Ethernet TCP/IP) System-log read command supported.
・ YOKOGAWA FA-M3/FA-M3R the defult setting of Communication parameter changed.
・ Universal Serial from PLC1 to PLC8 supported.
・ Jetter JetControl Series2/3(Ethernet UDP/IP) supported.
・ TOHO TTM-000 supported.
・ Allen-Bradley NET-ENI(SLC500 Ethernet TCP/IP) supported.
・ Allen-Bradley NET-ENI(Micrologix Ethernet TCP/IP) supported.
・ Fuji Electric FALDIC-W series supported.
・ GE Fanuc 90 Series(SNP-X) Multi Link2 compatible with V7 supported.
・ SHARP JW300 series supported.
・ SHARP JW series(Ethernet) supported.
・ SHARP JW311/213/321/322(Ethernet) supported.
・ SHARP JW331/332/341/342/352/362(Ethernet) supported.
・ Fuji Electric MicrexSX Redundancy supported.
・ KOYO SR-T(K Protocol) supported.
・ KOYO SU/SG supported.
・ GE Fanuc 90 series supported.
V7 series: PLCs newly supported.
・ Fuji Electric MicrexSX T-Link Redundancy supported.
PLC Ladder transfer function added:
・ MITSUBISHI QnA LadderMonitor supported
V8 series:
・ Range after scaling numbers in Number Display reflected to Minimum and Maximum numbers.
・ The function of printing Data Sheet extended.
V-SFT-5:
・ The dialogue setting of MES reformed.
・ The order INC of the Entry Target possible to be changed by Batch Change.
・ Windows Vista/Windows 7 64bit supported.
・ The addition of Attribute Specification Memory in Detail Tab of Number Display.
・ The brightness adjusting Macro/ BRIGHT/ for V808CH supported.
・ Tags of importing of Siemes S7-200 Format supported.

Feb-11 Ver. 5.4.17.0
V8 series SYS PROG: version V1.650
V7 series SYS PROG: version V1.880
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ YAMATAKE NX(CPL)
・ YAMATAKE NX(Modbus RTU)
・ YAMATAKE NX(Modbus TCP/IP)
・ Agilent 4263 series
・ Turck BL Series Distributed I/O (MODBUS TCP/IP)
・ RKC FB100/FB400/FB900 (MODBUS RTU)
・ MOELLER PS4
・ FUJI FRENIC5000G11S/P11S
・ FUJI PH series
・ Allen-Bradley ControlLogix(Ethernet) CPU slot No. supported.
V8 series: Grobal Overlap supported.
V8 series: Additional features for a panel meter supported.
V8 series: Mute setting for Overlap buzzer supported.
V8 series: UPDATE function added to MES macro command.
V8 series: Backup making feature for Recipe function supported.
V8 series: Archive error log for wiring to external media supported.
V-SFT-5:
・ Marging feature for the message supported.
・ The limit of the number of the letters in a switch/lamp changed.

Nov-10 Ver.5.4.16.0
V8 series SYS PROG: version V1.610
V7 series SYS PROG: version V1.870
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V-SFT-5: Failure fixed

Oct-10 Ver.5.4.15.0
V8 series SYS PROG: version V1.610
V7 series SYS PROG: version V1.870
V6 series SYS PROG: version V1.930
V606e series SYS PROG: version V1.940
V8 series: PLCs newly supported.
・ SANMEI CutyAxis
・ OMRON SYSMAC CS1/CJ1 DNA
・ OMRON SYSMAC CS1/CJ1 DNA(Ethernet)
・ Siemens S7-1200(Ethernet ISOTCP)
・ CIMON BP series
・ CIMON CP series
・ CHINO LT230(MODBUS RTU)
・ CHINO LT300(MODBUS RTU)
・ CHINO LT830(MODBUS RTU)
・ CHINO DB1000B(MODBUS RTU)
・ CHINO KR2000(MODBUS RTU)
・ Bosch Rexroth IndraDrive
V7 series: PLCs newly supported.
・ Siemens S7-1200(Ethernet ISOTCP)
・ MITUBISHI QnU built-in Ethernet
V8 series: Continuous printing of data sheet printing supported.
V8 series: Float numbers supported for trend graph / trend sampling and data sampling.
V8 series: Add and delete for numbers supported for numeral entry.
V8 series: Offset memory supported for numeral data display and character display.
V-SFT-5:
・ Remapping of the destination screen number supported for the switch function [screen].
・ End memory designation and memory count designation supported for Memory batch change.

Jul-10 Ver.5.4.14.0
V8 series SYS PROG: version V1.570
V7 series SYS PROG: version V1.860
V6 series SYS PROG: version V1.930
V8 series: PLCs newly supported.
・ WAGO 750series(MODBUS RTU)
・ WAGO 750series(MODBUS Ethernet)
・ UNITORONICS Vision Series(ASCII Ethernet TCP/IP)
・ HITACHI HIDIC-S10α
・ MITSUBISHI QnU series(Built-in Ethernet)
・ MITSUBISHI L series link
・ MITSUBISHI L series (Built-in Ethernet)
V8 series: Remote Desktop: Auto reduction function enhanced.
V8 series: Operation Log: Filtered display of the log viewer added.
V8 series: Operation Log: Operation log can be selected with each switch.
V8 series: Yokogawa: Comment can be uploaded when using ladder monitor feature.
V8 series: Mitsubishi: Compatible memory device extended with Q series.
V8 series: Macro command: IF(TST) macro command added.
V8 series: Macro command: GRE_TO_CLND command added (converting date).
V8 series: Graphs: Float data supported.
V8 series: Total number to be registered is extended with Overlap Library/Screen Library/Page Block

Jun-10 Ver.5.4.13.0
V8 series SYS PROG: version V1.560
V7 series SYS PROG: version V1.850
V6 series SYS PROG: version V1.930
V8 series: System Program fixed
・ - The system program will be upgraded to Ver.1.560 due to the change of the flash memory which
is used in V8 series.

Apr-10 Ver.5.4.12.0
V8 series SYS PROG: version V1.530
V7 series SYS PROG: version V1.850
V6 series SYS PROG: version V1.930
V7 series: System Program fixed.
・ Please refer to Improvement Information for further information.

Apr-10 Ver.5.4.11.0
V8 series SYS PROG: version V1.530
V7 series SYS PROG: version V1.840
V6 series SYS PROG: version V1.930
V8 series PLCs newly supported.
・ FUJI FVR-E11S
・ M-SYSTEM R1M series(MODBUS RTU)
・ OMRON KM20-B40
・ OMRON KM100
V8 series: Panasonic network camera supported.
V8 series: Japanese Conversion Function - supported models extended.
V8 series:OMRON SYSMAC CS1/CJ1 USB/Ethernet ladder transfer function
V8 series: MODBUS RTU EXP Free Format
・ maximum settable table number extended.
V8 series: Return switch - returning to the screen changed externally supported.
V8 series: PLC ladder monitor - supported function extended.
V8 series: PLC ladder monitor
・ OMRON CJ1 supported.
V8 series: Multi-link2 compatibility with V7 supported.
V-SFT-5: Windows 7 supported.
V-SFT-5: Font size became changeable in Macro edit screen.
V-SFT-5: Comments in multiple lines supported in Macro edit screen
V-SFT-5: File name added to the title in Macro edit screen
V-SFT-5: Selection Environment Setting - Option to apply to all screens supported.
V-SFT-5: Option for auto-update of System Program (SYS PRG) supported.
Frame Auto Fit - right-click menu added to support the batch change of multiple parts.
V-SFT-5: Tag - usage list function supported.

Feb-10 Ver.5.4.10.0
V8 series SYS PROG: version 1.520
V7 series SYS PROG: version 1.830
V6 series SYS PROG: version 1.930
V8 series PLCs newly supported.
・ GLOFA CNET
・ GLOFA GM series CPU
・ Allen-Bradley PLC-5
・ MITSUBISHI MR-J2S-*A
・ SHARP DS-30D
・ SHARP DS-32D
・ YASKAWA MP2000
・ YASKAWA MP2000 series (Ethernet)
Trend Graph: Background drawing feature supported.
V-SFT-5: Import/export feature in Tag Database supported.
V-SFT-5: Memory/number remapping when moving screens supported.
V-SFT-5: Batch change of Screen Library supported.
V-SFT-5: Extended cross-reference feature supported.
V-SFT-5: export/import of Network Table supported

Nov-09 Ver.5.4.9.0
V8 series SYS PROG: version 1.500
V7 series SYS PROG: version 1.820
V6 series SYS PROG: version 1.930
V8 series PLCs newly supported.
・ Automationdirect DirectLOGIC(Ethernet UDP/IP)
・ IDEC MICRO Smart pentra
・ TOSHIBA MACHINE VELCONIC series
・ MODBUS RTU EXP Format

Oct-09 Ver.5.4.8.0
V8 series SYS PROG: version 1.460
V7 series SYS PROG: version 1.800
V6 series SYS PROG: version 1.910
V8 series: MITSUBISHI ladder monitor extensions.
V8 series: YOKOGAWA USB/Ethernet ladder transfer function supported.
V8 series: Symbol edit function supported.
V8 series PLCs newly supported.
・ CHINO DP1000G
・ IAI RCP2/ERC
・ IAI RCS/E-CON
・ FUJI ELECTRIC MicrexSX(SPH) Batch activation/stop supported.
・ FUJI ELECTRIC FRENIC-MEGA(MODBUS RTU) Broadcast writing supported.
・ FUJI ELECTRIC FRENIC-5000VG7S(MODBUS RTU) Broadcast writing supported.
・ FUJI ELECTRIC FRENIC-Multi(MODBUS RTU) Broadcast writing supported.
・ FUJI ELECTRIC FRENIC-Eco(MODBUS RTU) Broadcast writing supported.
・ FUJI ELECTRIC PXG(MODBUS RTU) Port number is extended up to no. 247.
・ FUJI ELECTRIC PXH(MODBUS RTU) Port number is extended up to no. 247.
・ FUJI ELECTRIC PHR(MODBUS RTU) Port number is extended up to no. 247.
V-SFT-5: Macro symbol can be appeared on switch.
V8 series: 2-port supported with touchswitch emulation.
V8 series: Logout function supported in macro.
V8 series: Network camera AXIS M1011 supported.
V8 series: V7 compatible display in PAL supported.

Aug-09 Ver.5.4.7.0
V8 series SYS PROG: version 1.460
V7 series SYS PROG: version 1.800
V6 series SYS PROG: version 1.910
V8 series PLCs newly supported.
・ MODICON ModbusRTU
・ MITUBISHI MR-J3-*T
・ SHIMADEN Shimaden Standard Protocol
・ MODBUS RTU 1:n Multi-link2(Ethernet) supported.
・ Telemecanique TSX Micro
・ SHINKO TECHNOS JCx-300 series
・ LS GLOFA GM series (Ethernet UDP/IP)
V8 series: RKC Setting range of the station number was extended

Jul-09 Ver.5.4.6.0
New model
・ S808 series is added.
V8/V7/V6 series PLCs newly supported.
・ MITUBISHI FX3 series (A Protocol) supported.
V8 series PLCs newly supported.
・ MITUBISHI A series (CC-Link) supported.
・ MITUBISHI QnA series (CC-Link) supported.
・ GE Fanuc 90 series(Ethernet TCP/IP) supported.
・ DELTA DVP series supported.
V8 series: Allen-Bradley: BOOL is supported forControl Logix/Compact Logix
V8 series: Modbus RTU: Data length of 7-bit is added.
V8 series:Continuous buzzer for switch supported.
V-SFT-5: Macro tool bar added.
V-SFT-5: Batch setting of the Page block edit is supported.

May-09 Ver.5.4.4.0
V8series PLCs newly supported.
・ MITSUBISHI FX3U-ENET supported.
・ UNIPULSE F720A supported.
・ UNIPULSE F800 supported.
・ EMERSON EC10/20/20H (MODBUS RTU) supported.

Apr-09 Ver.5.4.3.0
V8 sereis: AB: Memory range extended from 65:255 to 255:255
Fuji: SX Instrumentation Package function supported.
V808C: V609E compatible display function added. (128-color only)
V8series PLCs newly supported.
・ Hitachi Industrial Equipment System SJ300series supported.
・ Hitachi Industrial Equipment System SJ700series supported.
・ UNIPULSE F340A supported.
・ UNIPULSE F371 supported.
・ TOSHIBA EXseries supported.
・ Banner Vision Ethernet I/P Protcol supported.
・ MITSUBISHI QnH(Q)series (Ethernet ASCII) supported.
・ MITSUBISHI QnH(Q)series (Multhi CPU) (Ethernet ASCII) supported.
・ Siemens S7-200PPI: 187.5kbps supported.
V7/V6series PLCs newly supported.
・ KEYENCE KV-3000/5000 supported.

Feb-09 Ver.5.4.1.0
V8 sereis: Remote Desktop function supported.
V8series PLCs newly supported.
・ FL-Net supported.

ΔTop