Two methods are available. Follow the steps below.

[Method 1: Select a desired design from supplied parts]

V-SFT Ver.6

The following procedure uses the switch part as an example.

1. Double-click on the switch.

    

2. Display the [Switch] dialog and click [Style] → [Select from catalog] → [Select].
   
   * Select [Select from image file] when using bitmap files created by the customer.

    

3. Select a desired part and click [OK].
   
   * Check [Maintain Size]  to keep the size of the placed part when
   changing the part design.

V-SFT Ver.5

The following procedure uses the switch part as an example.

1. Double-click on the switch.

    

2. Display the [Switch] dialog and click [Style] → [Change Part].
   
   * Click [Customize] → [Use Custom Bitmap] when using bitmap files created by the customer.

    

3. Select a desired part and click [Select].
   
   * Check [Maintain Size] to keep the size of the placed part when
   changing the part design.

[Method 2: Edit the design as desired]

1. Click on the part to select it.

    

2. Display the [Modify Part] window as described below.
   
   
   • Right-click menu → [Change Part] → [Modify Part]
     
     
     
   • [Edit] → [Change Part] → [Modify Part]
     
     
      
3. Configure part design as desired and, if necessary, set the outer frame *.
   
     
   
   * The "outer frame" means the gray frame as shown above.
      The inside of this frame appears as a part on the screen.
      Drag the handle or display the right-click menu and select [Frame Auto Fit].

    

4. When editing has been finished, close the [Modify Part] window.