date: 2021/8/3
How to draw reference lines in a trend graph or trend sampling part
V-SFT Ver.6
[To draw four or less horizontal reference lines]
Display the [Trend Graph] dialog and click [Contents]. Check a [Reference Line] to use and set the value for displaying and its color. (4 lines maximum)
[To draw five or more horizontal reference lines or vertical reference lines]
Reference lines can be displayed on the scale marks.
For more information, click here.
Example: Configure settings on the [Left] or [Bottom] tab window.
- In the [Trend Graph] dialog, click [Other Settings] -> [Scale] and check [Set Scale Display].
- Check [Scale] on the [Left] and [Bottom] tabs. Check [Grid Line] and set as necessary.
V-SFT Ver.5
[To draw four or less horizontal reference lines]
Display the [Trend Graph] / [Trend Sampling] dialog, check [Reference Line] and set the value to be displayed and its color. (4 lines maximum)
[To draw five or more vertical reference lines]
* This is available with V-SFT version 5.4.27.0 and later.
Only with the TS/V8 series, reference lines can be displayed on the scale marks.
For more information, click here.
Example: Configure settings on the [Left] or [Bottom] tab window.
- Display the [Trend Graph] / [Trend Sampling] dialog, select [Scale], and check [Set scale display].
- Select [Left] or [Bottom] and check [Grid Line] and configure settings.
|
|
In the case of [Trend Graph], reference lines can also be drawn on the [Modify Part] window. In the case of [Trend Sampling], reference lines cannot be displayed correctly in this way. Be sure to draw reference lines as described above. |
Was this page helpful?
Please cooperate with the questionnaire to make it better.
