Fuji Electric Co.,LTD
Global
Hakko Electronics (Europe)
Select Region
  • Global
  • Europe
  • Japan
  • China
  • Asia
    • Taiwan
    • Korea
Print
Font Size
  • Small
  • Medium
  • Large
  • Home
  • HMI
  • Company profile
  • » Products
  • » Support
  • » FAQ
  • » Distributors
  1. Home >
  2. FAQ
V8/TS2060 series Questions about HKFAQ000196

date: 2021/7/16

How to provide a numerical data entry feature using a keypad

Follow the steps below.

 

* If you are using the V-SFT-6, see here.

 

 

[To call a numeric keypad when an entry target is pressed]
* In the case of models earlier than the V7 series, click here.

 

Operation example
Pressing on a numerical data display part brings up a keypad equipped with entry keys.
V8series|How to provide a numerical data entry feature using a keypad

 

When "521" is entered and the [Enter] key is pressed, it will be written into the memory of entry target. The numeric keypad will disappear.
V8series|How to provide a numerical data entry feature using a keypad

 

  1. Select [Parts] → [Data Display] → [Num. Display], and place numerical data display parts.
  2. Display the [Num. Display] dialog, select [Main] and configure as below.
    - Write target memory
    - Function: Entry Target
    - Check [With Entry Key].
    V8series|How to provide a numerical data entry feature using a keypad

  3. Press [Register] to register a numeric keypad.
  4. Check [Display Position] and specify the coordinates to determine the keypad display position.
    When the setup has been completed, a multi-overlap icon is displayed in addition to the numerical data display part.
    V8series|How to provide a numerical data entry feature using a keypad

 

[To place entry targets and a numeric keypad on the same screen]

Operation example
When "521" is entered from the numeric keypad and the [Enter] key is pressed, it will be written into the memory of entry target.
V8series|How to provide a numerical data entry feature using a keypad

 

  1. Select [Parts] → [Data Display] → [Num. Display], and place numerical data display parts.
  2. Display the [Num. Display] dialog, select [Main], and set the write target memory and [Function: Entry Target].
    V8series|How to provide a numerical data entry feature using a keypad

  3. Select [Parts] → [Entry], and place a numeric keypad.

 

Was this page helpful?

Please cooperate with the questionnaire to make it better.

  • Back to FAQ top

FAQ by product

  • V10/V9 series

  • V8/TS2060 series

  • TELLUS and V-Server

Most searched FAQs

  • Communication error "Error code received"
  • I want to search where these buttons are used:
    - Screen Change-over buttons
    - Overlap Control buttons
  • Communication Error "Timeout"
  • "The port cannot be opened."
  • What PLC models can be connected?
To page top
  • » Inquiries about products
  • » Inquiries about sales
  • » Request for catalogs
  • » Compliance with the RoHS

MONITOUCH

LINE UP
  • X1 SERIES
  • V10 SERIES
  • V9 SERIES
  • TECHNOSHOT
  • Web Machine Interface
  • Smart Editor
  • V-SFT
  • TELLUS and V-Server
Support »
  • Download
  • Inquiries
  • Recommended peripheral equipment
FAQ »
  • FAQ concerning MONITOUCH
Distributors »
  • Overseas distributors
  • » Privacy Policy
Copyright©2013 Hakko Electronics Co., Ltd. All Right Reserved