Check the network condition with V9's [Network Test] and [Duplicate IP Test] screens.

Network test (send ping command)

This is to check whether the V9 establishes connection with target device.

1. Display V9's local screen.
   * To switch to the local screen, click here.
   
   
2. From the left pane, go to [I/O Check] > [Network Test].
   
   
   
   
3. Enter the target IP address to [IP selection] and press [Start Test] button.
   Test results:
   OK: Network connection is established.
   NG: Network connection is not established. Please check LAN cables and the IP address.

Duplicate IP Test

This is to check whether any device with the same IP address as V9's exists on the network.

1. Display V9's local screen.
   * To switch to the local screen, click here.
   
   
2. From the left pane, go to [I/O Check] > [Duplicate IP Test].
   
   
3. Press [Start Test] button.
   
   
   
   When a duplicated IP address is found on the network, please check IP address of each device and set the address adequately.