Fuji Electric Co.,LTD
Global
Hakko Electronics (Europe)
Select Region
  • Global
  • Europe
  • Japan
  • China
  • Asia
    • Taiwan
    • Korea
Print
Font Size
  • Small
  • Medium
  • Large
  • Home
  • HMI
  • Company profile
  • » Products
  • » Support
  • » FAQ
  • » Distributors
  1. Home >
  2. FAQ
V10/V9 series Product Specifications HKFAQ000323

date: 2024/12/2

What types of cables can be used for screen program transfer?

Screen program transfer is possible using a commercially-available USB or Ethernet cable.
The "V-CP" or "UG00C-T1" serial transfer cable manufactured by Hakko Electronics can also be used.

The following table lists each series and the corresponding available transfer methods.

Series

USB

Ethernet

Serial
("V-CP" , "UG00C-T1") *1

 V10
 V9

〇
V10 / V9 side: USB-miniB

〇*2

〇
 TS2060(i)

〇
TS2060 side: USB-miniB

△*2*3

〇

 V8
 UG40

〇
V8 / UG40 side: USB-B

△*3*4

〇
 V7
 UG30

△
V706/V715/UG230/UG630 only
V7 / UG30 side: USB-B

△*3*5

〇

 V6
 UG20
 Simple POD
× △*6 〇
 V4 *7
 V4S
 UG400
 UG210
× × 〇
+ "ADP25-M" option

 GD-80 *7
 GD-81S
 UG200

× ×

〇
+ "ADP25-M" option

 GD-80S × ×

△*8

*1 If the computer is not equipped with a serial port, use a commercially-available
     USB-to-serial converter.
     Connect "V-CP" or "UG00C-T1" to the MJ1 port on MONITOUCH.
*2 A straight cable can also be used with or without a hub.
*3 Type with built-in LAN port.
*4 When the "CU(N)-03-x","UG03I-E" communication unit is installed.
*5 When the "CU-03-x","UG03I-E" communication unit or "DU-01","UG230A-DCL" option
     unit is installed.
*6 When the "CU-03-x","UG03I-E" communication unit is installed.
*7 It is possible to make your own cable for serial transfer with the V4/GD-80/GD-81S
    /UG400/UG210/UG200 by referring to the wiring diagram. 

  

*8 Serial transfer with the GD-80S cannot be performed using the "V-CP" or "UG00C-T1"
     cable.
     Make your own cable by referring to the wiring diagram.

  

 

Was this page helpful?

Please cooperate with the questionnaire to make it better.

Related questions(FAQ)

  • Which version of the screen configuration software is supported by each MONITOUCH model?
  • Back to FAQ top

FAQ by product

  • V10/V9 series

  • V8/TS2060 series

  • TELLUS and V-Server

Most searched FAQs

  • Communication error "Error code received"
  • I want to search where these buttons are used:
    - Screen Change-over buttons
    - Overlap Control buttons
  • Communication Error "Timeout"
  • "The port cannot be opened."
  • What PLC models can be connected?
To page top
  • » Inquiries about products
  • » Inquiries about sales
  • » Request for catalogs
  • » Compliance with the RoHS

MONITOUCH

LINE UP
  • X1 SERIES
  • V10 SERIES
  • V9 SERIES
  • TECHNOSHOT
  • Web Machine Interface
  • Smart Editor
  • V-SFT
  • TELLUS and V-Server
Support »
  • Download
  • Inquiries
  • Recommended peripheral equipment
FAQ »
  • FAQ concerning MONITOUCH
Distributors »
  • Overseas distributors
  • » Privacy Policy
Copyright©2013 Hakko Electronics Co., Ltd. All Right Reserved