Fuji Electric Co.,LTD
Global
Hakko Electronics (Taiwan)
Select Region
  • Global
  • Europe
  • Japan
  • China
  • Asia
    • Taiwan
    • Korea
Print
Font Size
  • Small
  • Medium
  • Large
  • 首頁
  • HMI
  • 公司簡介
  • ≫ 產品情報
  • ≫ 服務中心
  • ≫ FAQ(常見問題)
  • ≫ 代理商
  1. 首頁 >
  2. 產品情報
V8/TS2060 series Questions about HKFAQ000173

date: 2021/8/3

How to save sampling data even after turning off the TS/V series

Select [SRAM] or [Storage/CF Card] for the storage location of sampling data.
With [SRAM] selected, backup power is supplied from the battery attached to the MONITOUCH when the power is OFF.

TS/V8 series

V-SFT Ver.6
  1. Select [System Setting] → [Buffering Area Setting] → [Data Output Settings], and select [Device Type: SRAM] for the primary storage target or [Device Type: Storage] for the secondary storage target.

     

    V8series|How to save sampling data even after turning off power to the V series

    When [Device Type: SRAM] is set, make sure that the supplied battery is installed to MONITOUCH.

     

     

  2. Transfer the screen data.

     

  3. "Error : 163 (24 : 0)" or "161 (24 : 0)" is displayed.
    When [Device Type: SRAM] is set for the primary storage target, the SRAM must be formatted on the TS/V series.
    Bring up the Main Menu screen on the TS/V8 series, and press [Main Menu] → [SRAM/Clock] → [Format] → [Execute].
    For more information, click here.

 

V-SFT Ver.5
  1. Select [System Setting] → [Buffering Area Setting], and select [Type: SRAM] for the primary storage target or [Output Media: Storage/CF Card] for the secondary storage target.

     

    V8series|How to save sampling data even after turning off power to the V series

    When [Type: SRAM] is set, make sure that the supplied battery is installed to MONITOUCH.

     

     

  2. Transfer the screen data.

     

  3. "Error : 163 (24 : 0)" or "161 (24 : 0)" is displayed.
    When [Type: SRAM] is set for the primary storage target, the SRAM must be formatted on the TS/V series.
    Bring up the Main Menu screen on the V8 series, and press [Main Menu] → [SRAM/Clock] → [Format] → [Execute].
    For more information, click here.

 

 

V7 series


Select [System Setting] → [Buffering Area Setting], and select [SRAM] or [CF Card] for [Store Target].
When [Store Target: SRAM] is set, the SRAM must be formatted. Follow steps (1) to (4).

 

V8series|How to save sampling data even after turning off power to the V series

When [Store Target: SRAM] is set, install the supplied battery to the MONITOUCH.

 

 

  1. Click [SRAM Setting] and specify a value greater than [Word Count] for [Set Word] of [Memory Card Emulation Area].
    V8series|How to save sampling data even after turning off power to the V series

     

  2. Select [Parts] → [Parts List] → [Memory Card] → [2D] or [3D] [#x FormatSwitch], place it on the screen, and then transfer screen data.

     

  3. "Data has some error 163 or 161" is displayed. Bring up the Main Menu screen on the V7 series, and press [SRAM/Clock] → [Format] → [Execute].

     

  4. Press the card format switch placed in step 2.

Was this page helpful?

Please cooperate with the questionnaire to make it better.

  • Back to FAQ top

FAQ by product

  • V10/V9 series

  • V8/TS2060 series

  • TELLUS and V-Server

Most searched FAQs

  • Communication error "Error code received"
  • I want to search where these buttons are used:
    - Screen Change-over buttons
    - Overlap Control buttons
  • Communication Error "Timeout"
  • "The port cannot be opened."
  • What PLC models can be connected?
To page top
  • ≫ 產品諮詢
  • ≫ 營業銷售諮詢
  • ≫ 索取産品目錄
  • ≫ 支援RoHS指令

MONITOUCH

LINE UP
  • X1 SERIES
  • V10 SERIES
  • V9 SERIES
  • TECHNOSHOT
  • Web Machine Interface
  • Smart Editor
  • V-SFT
  • TELLUS and V-Server
服務中心 ≫
  • 下載
  • 諮詢
  • 推薦外圍設備
FAQ(常見問題) ≫
  • FAQ concerning MONITOUCH
代理商 ≫
  • Overseas distributors
  • ≫ Privacy Policy
Copyright©2013 Hakko Electronics Co., Ltd. All Right Reserved