Two methods are available. Follow the steps below.

[When storing data from the PC (V-SFT) to a storage device]

 V-SFT Ver.6

1. Click [File] -> [Storage Manager].

    

2. Specify the drive where the storage device is inserted and click [OK].
   The [Storage Manager] window is displayed.
   

    

3. Click [Write to Storage].
   Select the screen data from [Open] and click [OK].
   
   * When writing screen data that is being edited, check [Write Data Being Edited].

    

4. Writing starts.
   Screen data will be written as a BIN file in the DSP folder in the access folder (default: DAT0000) on the storage device.
   

    

   If the screen data file is copied onto the storage device, the TS/V series cannot recognize the file. Be sure to write data as described above.

V-SFT Ver.5

1. Click [File] → [CF Card Manager].

    

2. Specify the drive where the CF card is inserted and click [OK]. The [CF Card Manager] window is displayed.

    

3. Select [File] → [Write to CF Card].
   

    

4. The [Write to CF Card] dialog is displayed.
   Click [Open] and select the screen data file to write to the CF card for [Path of File to Be Converted].
   
   
   * When writing screen data that is being edited, check [Write Data Being Edited].
   
   
   
5. Click the [OK] button to start writing. Screen data will be written as a BIN file in the DSP folder in the access folder (default: DAT0000) on the CF card.
   

    

   If the screen data file is copied onto the CF card, the TS/V series cannot recognize the file. Be sure to write data as described above.

    

[When storing data from the TS/V series to a storage device]

TS2060i

1. Press [Main Menu] on the Main Menu screen and press [Storage Transfer].

    

2. The Storage Transfer screen is displayed.
   Set as shown below:
• [Target for Storage: Built-in Socket or USB Port]
• [Data Selection: Screen Data]

   

3. Press [Transfer Menu: Display → Storage].

    

4. Check the storage file information and folder name, and press [Start].
   (During data transfer, the [Start] switch changes to "Transferring".)

    

5. When the data has been transferred successfully, the [Work normally finished.] dialog is displayed.
   Press the [OK] switch.
   
   Screen data will be written as a BIN file in the DSP folder in the access folder (default: DAT0000) on the storage device.
   
   For more information about the operating procedure, click here.

TS1000S series

1. Press [Main Menu] on the Main Menu screen and press [Storage Transfer].

    

2. The Storage Transfer screen is displayed.
   Select [Screen Data] in Data Selection Menu.
   
   
3. Press [Transfer Menu: Display → Storage].

    

4. Check the storage file information and folder name, and press [Start].
   (During data transfer, the [Start] switch changes to "Transferring".)

    

5. When the data has been transferred successfully, the [Work normally finished.] dialog is displayed.
   Press the [OK] switch.
   
   Screen data will be written as a BIN file in the DSP folder in the access folder (default: DAT0000) on the storage device.
   
   For more information about the operating procedure, click here.

V8/V7 series

1. Press [Main Menu] on the Main Menu screen and press [Card Menu].

    

2. The Card Transfer screen is displayed.
   Set as shown below:
• [CF Card Inserted to: Built-in Socket or USB Port (CF card recorder)]
• [Data Selection: Screen Data]

   

3. Press [Transfer Menu: Display → Card].

    

4. Check the CF card file information and folder name, and press [Start].
   (During data transfer, the [Start] switch changes to "Transferring".)

    

5. When the data has been transferred successfully, the [Work normally finished.] dialog is displayed.
   Press the [OK] switch.
   
   Screen data will be written as a BIN file in the DSP folder in the access folder (default: DAT0000) on the CF card.
   
   For more information about the operating procedure, see below.
   For V8 series, click here.
   For V7 series, click here.