Fuji Electric Co.,LTD
Global
Hakko Electronics (Taiwan)
Select Region
  • Global
  • Europe
  • Japan
  • China
  • Asia
    • Taiwan
    • Korea
Print
Font Size
  • Small
  • Medium
  • Large
  • 首頁
  • HMI
  • 公司簡介
  • ≫ 產品情報
  • ≫ 服務中心
  • ≫ FAQ(常見問題)
  • ≫ 代理商
  1. 首頁 >
  2. 產品情報
V8/TS2060 series Error HKFAQ000341

date: 2022/3/2

Ethernet Error:205

This error occurs when a TCP connection cannot be established when connecting to a network device using TCP/IP.

 

<Cause>

  1. The LAN cable is not connected correctly.
    Or power to the connected device is not turned on.

  2. "Disconnect" is displayed at the bottom left of the Main Menu → Ethernet screen.


  3. Communication settings (IP address, port number, etc.) on the TSi/V series
    do not match those of the connected device.

 

<Solutions>

Case A
  • Check if the LAN cable is connected to the LAN connector correctly.
  • Turn power to the connected device off and on again.

Case B

"Disconnect" displayed at the bottom left of the Main Menu → Ethernet screen must be changed to "Connect".
V8series|Receive timeout

  • Depending on whether the hub is used or not, the cable type to use varies.
    Check the cable in use.
    - With hub: Straight cable
    - Without hub: Cross cable

  • When a hub is used, check the LED that indicates the hub link condition.
    If not lit, check the cable, and insert it into another empty port on the hub.

  • Turn on the hub again.

  • Check for errors in setting, such as exchanged data between the subnet mask and default gateway of the TSi/V series.

Case C
  • Check that the [Maker], [Model], and [Target Port No.] settings of the connected device are configured correctly in the screen program.
  • Check that the IP address, port number, and other communication settings match on both the connected device and the TSi/V series unit.

 

Example) MICREX-SX (Ethernet)

 

How to check the manufacturer and model of the connected device:

Double-click on [PLC Setting] located at [System Setting] → [Hardware Setting].




How to check the communication settings:
Click [System Setting] → [Hardware Setting] → [PLC Properties]→ [PLC Table] → [Setting].

 

For information on settings for Fuji Electric's MICREX-SX, click here.

Was this page helpful?

Please cooperate with the questionnaire to make it better.

  • Back to FAQ top

FAQ by product

  • V10/V9 series

  • V8/TS2060 series

  • TELLUS and V-Server

Most searched FAQs

  • Communication error "Error code received"
  • I want to search where these buttons are used:
    - Screen Change-over buttons
    - Overlap Control buttons
  • Communication Error "Timeout"
  • "The port cannot be opened."
  • What PLC models can be connected?
To page top
  • ≫ 產品諮詢
  • ≫ 營業銷售諮詢
  • ≫ 索取産品目錄
  • ≫ 支援RoHS指令

MONITOUCH

LINE UP
  • X1 SERIES
  • V10 SERIES
  • V9 SERIES
  • TECHNOSHOT
  • Web Machine Interface
  • Smart Editor
  • V-SFT
  • TELLUS and V-Server
服務中心 ≫
  • 下載
  • 諮詢
  • 推薦外圍設備
FAQ(常見問題) ≫
  • FAQ concerning MONITOUCH
代理商 ≫
  • Overseas distributors
  • ≫ Privacy Policy
Copyright©2013 Hakko Electronics Co., Ltd. All Right Reserved