◆Configuration Software |
No |
Item |
Description |
V8 |
TS |
V9 |
20C0H01 |
3D parts |
Fixed the defect: When the V8/TS series is selected for [Edit Model] and the [Importing message and comment data from text file when data transfer] checkbox is selected on the [Property] -> [Transfer] tab window, 3D parts are displayed as rectangles that are colored solid after the screen program is transferred to the V8 or TS series unit. |
● |
● |
|
20C0H02 |
Rectangle with chamfering |
Fixed the defect: When the [Display Area] checkbox is deselected on the [View] -> [Display Environment] -> [Display] tab window and a rectangle with chamfering uses the thick line type, the rendering position of the rectangle deviates when it is copied and pasted. |
|
|
● |
20C0H03 |
TELLUS |
Fixed the defect: When TELLUS Ver.4 is selected for [Edit Model] and the resolution is 1920 x 1080, the editor lags in cases such as when placing parts. |
|
|
|
20C0H04 |
Display color |
Fixed the following defects regarding switches and lamps on version 6.0.39.0: - The display color does not change after changing settings on a switch or lamp settings window. - The display color of switches and lamps change to unintended colors. |
|
|
● |
20C0H05 |
MICREX-SX Variable name cooperation |
Fixed the defect: When a V6/V7 screen program with variable name arrays registered as alarms is converted into a V8/V9 screen program, elements of the arrays are shifted. |
● |
● |
● |
20C0H06 |
Screen program size change |
Fixed the defect: When Windows fonts are used with bit order alarming and the resolution is changed on the [Edit Model Selection] window, the displaying of messages may be disabled. |
|
|
● |
20C0H07 |
Pattern |
Fixed the defect: The editor forcibly terminates if pattern data is corrupted and an error check is performed. |
|
|
● |
20C0H08 |
Screen program size change |
Fixed the defect: When Gothic or Stroke font is used and the resolution is changed on the [Edit Model Selection] window, the displaying of messages may be disabled. |
|
|
● |
20C0H09 |
Custom color |
Fixed the defect: When a custom color is specified for shapes such as rectangles, the set color may change after the screen program file is closed and opened again. |
|
|
● |
20C0H10 |
File comparison |
Fixed the defect: When a V8 screen program is converted into a V9 screen program using a version lower than 6.0.35.0 and a version of 6.0.35.0 or higher, differences are detected between the resulting screen programs in screens and overlap libraries upon [File Comparing] (with [Text comparison] selected) even though they should be the same. |
|
|
● |
20C0H11 |
File comparison |
Fixed the defect: When a screen program with 32-K colors and a switch placed is transferred to a V9 series unit, and then the color setting is changed to 64-K colors on the [Edit Model Selection] window, differences are detected not only in the color but also in the Y-size of the switch touch area upon [File Comparing]. |
|
|
● |
20C0H12 |
PLC model change |
Fixed the defect: When the PLC model of a screen program is changed from Mitsubishi Electric's "QnA series link" to "QnH (Q) series link" and then back again to "QnA series link", a communication error occurs on MONITOUCH. |
|
|
● |
20C0H13 |
Ethernet transfer |
Fixed the defect: Screen program transfer fails if Ethernet transfer is attempted with [Transfer to multiple IPs] selected on version 6.0.39.0. |
|
|
● |
20C0H14 |
Initial screen display |
Fixed the defect: When a screen program is opened using version 6.0.39.0, screen 0 is always displayed. |
|
|
● |
20C0H15 |
Windows 10 |
Fixed the defect: The editor, when installed on a 64-bit Windows 10, version 2004 operating system, lags when moving a switch on a multi-overlap display. |
|
|
● |
20C0H16 |
Switches/Lamps |
Fixed the defect: When multiple switches/lamps with a differing number of patterns are selected and the settings window is displayed, the number of patterns changes to two for all of the switches/lamps. |
|
|
● |
20C0H17 |
GD-80 |
Fixed the defect: The resulting screen program differs between when a GD-80 screen program is converted into a V8 screen program and then into a V9 screen program and when a GD-80 screen program is converted directly into a V9 screen program. |
|
|
● |
20C0H18 |
Windows font |
Fixed the defect: When the character set of the specified Windows font does not exist on version 6.0.39.0, characters cannot be input. |
|
|
● |
20C0H19 |
Fuji Electric MICREX-SX |
Fixed the defect: When a Fuji Electric MICREX-SX N mode or F mode is selected as a PLC model and the screen program is transferred to MONITOUCH using version 6.0.39.0, a communication error (error code A0) occurs upon displaying a screen that uses X or Y device memory addresses. |
|
|
● |