◆HMI Program |
No. |
Item |
Description |
X1 |
Version |
2340L01 |
Logging |
Fixed the defect: When storage output of logging data is executed using the storage output bit and the ladder is built in the order of ""confirmation of storage output confirmation bit ON"" -> ""reset bit ON"" -> ""confirmation of reset confirmation bit ON"", the reset confirmation bit may not turn ON after the reset bit turns ON. |
● |
1.500 |
2340L02 |
Information output device memory |
Fixed the defect: When a V8 screen program is converted into a V9 screen program, if the relay bit turns ON, the information output device memory ""n"" is updated immediately but updating of the ""n+2"" device memory is slightly delayed. |
● |
1.500 |
2340L03 |
E-mail |
Fixed the defect: Emails may not be sent if using G-mail or STARTTLS. |
● |
1.500 |
2340L04 |
Switch |
Fixed the defect: When the lamp device memory is turned ON under specific conditions for a switch that is set to be transparent (rendering mode: XOR), the switch may be displayed in gray. |
● |
1.500 |
2340L05 |
Numerical data display |
Fixed the defect: The values displayed on the ""Mean Value Display"", ""Max. Display"", ""Min. Display"", and ""Total Display"" parts for a data display (logging) part cannot be cleared by pressing the switch of the ""Reset"" function. |
● |
1.500 |
2340L06 |
Pattern display |
Fixed the defect: When a screen program that has 17 or more languages set, if the language is switched to the 17th language or later, all pattern numbers are displayed as ""0"". |
● |
1.500 |