Check the network condition with V10/V9's [Network Test] and [Duplicate IP Test] screens.

Network test (send ping command)

This is to check whether the V10/V9 establishes connection with target device.

1. Display V10/V9's local screen.
   * How to switch to the local screen
      V10 series: Click here.
      V9 series: Click here.
   
   
2. From the left pane, go to [I/O Check] > [Network Test].
   
   
   
   
3. Enter the target IP address to [IP selection] and press [Start Test] button.
   Test results:
   OK: Network connection is established.
   NG: Network connection is not established. Please check LAN cables and the IP address.

Duplicate IP Test

This is to check whether any device with the same IP address as V10/V9's exists on the network.

1. Display V10/V9's local screen.
   * How to switch to the local screen
      V10 series: Click here.
      V9 series: Click here.
   
   
2. From the left pane, go to [I/O Check] > [Duplicate IP Test].
   
   
3. Press [Start Test] button.
   
   
   
   When a duplicated IP address is found on the network, please check IP address of each device and set the address adequately.