Messages are not displayed in the alarm tracking display.
- The bit corresponding to the message is not ON.
- The display mode for displaying messages is not checked in the [Alarm Device] settings of the alarm server.
- A filter is applied.
- Check if the bit corresponding to the message is ON.
- Check [Alarm History], [Event History], and [Real Time] on the [System Setting] -> [Alarm Server] -> [Alarm Device] tab.
- Check if the items to display are checked at [Filter] on the [Alarm] dialog.
Or press the [Filter] switch on the V series and check if the items to display are checked.
Was this page helpful?
Please cooperate with the questionnaire to make it better.