date: 2021/8/3
What types of cables can be used for screen program transfer?
Screen program transfer is possible using a commercially-available USB or Ethernet cable.
The "V-CP" serial transfer cable manufactured by Hakko Electronics can also be used.
The following table lists each series and the corresponding available transfer methods.
Series |
USB |
Ethernet |
Serial |
V9 |
〇 |
〇*2 |
〇 |
TS2060(i) |
〇 |
△*2*3 |
〇 |
V8 |
〇 |
△*3*4 |
〇 |
V7 |
△ |
△*3*5 |
〇 |
V6 |
× | △*6 | 〇 |
V4 *7 |
× | × | 〇 + "ADP25-M" option |
GD-80 *7 |
× | × |
〇 |
GD-80S | × | × |
△*8 |
*1 If the computer is not equipped with a serial port, use a commercially-available USB-to-serial converter.
Connect "V-CP" to the MJ1 port on MONITOUCH.
*2 A straight cable can also be used with or without a hub.
*3 Type with built-in LAN port ("i" in the model name), or V715X
*4 When the "CU(N)-03-x" communication unit is installed
*5 When the "CU-03-x" communication unit or "DU-01" option unit for V706 is installed
*6 When the "CU-03-x" communication unit is installed
*7 It is possible to make your own cable for serial transfer with the V4/GD-80/GD-81S by referring
to the wiring diagram.

*8 Serial transfer with the GD-80S cannot be performed using the "V-CP" cable.
Make your own cable by referring to the wiring diagram.

Was this page helpful?
Please cooperate with the questionnaire to make it better.