Follow the steps below.

* If you are using the V-SFT-6, see here.

[When searching for character strings]
Example: Search for character string "switch".

1. Select [Tool] → [Search and Replacement] → [Text Search and Replacement] → [Search] tab.
2. Enter "switch" into [Text to search for] and click [Search].
   
   
   
3. The search result list shows the occurrences including the character string "switch". *
   Select a line with the cursor in the list, double-click on it or click the [VIEWJUMP] icon to jump to the selected item.
   To narrow down the search condition, go to step (4).
   * When nothing is found, "None / No occurrence." appears.
   

    

   Example: Select character string "switch/lamp" and click the [VIEWJUMP] icon.
   
   
   Screen No. 0 appears with the character string selected.
   
   
   
   
4. Click [Option] (or [Option] icon) to display the [Option Setting] dialog.
   Specify the [Search Range] and [Search condition] and click [OK].
   Example: Search screens No. 0 to 10 for complete matches.
   
   
   The search result list shows the occurrences of the character string "switch" only.
   

[When replacing character strings]
Example: Replace "switch" with "SW".

1. Select [Tool] → [Search and Replacement] → [Text Search and Replacement] → [Replacement] tab.
2. Enter "switch" into [Text to search for] and click [Search].
   * Search must be run before replacing.
   
   
   
3. The search result list shows the occurrences including the character string "switch". *
   
   * When nothing is found, "None / No occurrence." appears.
   To narrow down the search condition, click [Option] (or [Option] icon) and specify the [Search Range] and [Search condition].
   
   
4. Enter "SW" into [Replaced text] and click [Replace] or [Replace All].
   
   * Replaced character strings turn cyan.