Pressing the touch switch activates nothing or activates a position that deviates from the switch.
Check if there is any problem on the touch switch screen. Display the touch screen test screen (grid screen), press a position on the panel, and check if the pressed position turns white.
Switch to Local mode and press [I/O Check] in the menu icons. On the [Touch switches and media] tab, press the [Test] switch to display the Touch Switch Test screen.
If a position different from the pressed position turns white on the touch switch test screen, perform touch switch adjustment.
[V9 Advanced models]
Touch switches can be adjusted on only the V9100iW and V9070iW (analog resistive film type).
- Turn off the V9 series.
- Slide the DIP switch upward to the ON position.
- Turn on the V9 series. The Touch Switch Test screen is displayed.
- Press the [Correct] switch. For the touch switch adjustment procedure, refer to "Touch Switch Adjustment".
- After adjustment, turn off the V9 series and slide DIP switch 2 downward to the OFF position.
Was this page helpful?
Please cooperate with the questionnaire to make it better.