| ◆Configuration Software |
| No. |
Item |
Description |
TS/V8 |
V9 |
V10 |
X1 |
| 2504H01 |
Multi-monitor display |
Fixed the defect: When editing in a multi-monitor environment and attempting to change the device memory address of a switch or data display part, the input field of the pull-down display extends onto the other monitor. |
● |
● |
● |
● |
| 2504H02 |
Properties display |
Fixed the defect: When the PC display is extended or the taskbar is displayed on the right side, the device memory entry field on the [Properties] pane may extend out from the editor. |
● |
● |
● |
● |
| 2504H03 |
Alarm block |
Fixed the defect: When using common device memory of a general-purpose FL-Net for an alarm block, an error occurs if exported and then imported. |
● |
● |
● |
● |
| 2504H04 |
Windows fonts |
Fixed the defect: When a multi-text part that uses a Windows font for Thai or Vietnamese, the display position may be shifted. |
● |
● |
● |
● |
| 2504H05 |
KeepAlive setting |
Fixed the defect: When [Edit Model] is TELLUS Ver. 4, TELLUS Ver. 4 (iPad), or TELLUS Ver. 5, the KeepAlive settings are not displayed for MODBUS TCP/IP. |
|
|
|
|
| 2504H06 |
Macro preview |
Fixed the defect: When comments in a macro are in Chinese or Korean, the comments may be garbled on macro previews such as for interval timers and switch ON/OFF macros. |
● |
● |
● |
● |
| 2504H07 |
Device memory search |
Fixed the defect: The editor may be forcibly terminated when [Tool] -> [Search] -> [Device] -> [Device Designation] is deselected and [OK] is pressed. |
● |
● |
● |
● |
| 2504H08 |
Character display |
Fixed the defect: When a large file is being opened and the screen list is displayed or the screen is switched over multiple times before loading of the file is completed, characters may not be displayed correctly. |
● |
● |
● |
● |
| 2504H09 |
Storage manager |
Fixed the defect: When the storage manager is used to return BIN files stored in the DSP folder to the screen program using the storage manager, the color of 3D parts such as switches and lamps may change when the program is opened on the editor. |
● |
● |
● |
● |
| 2504H10 |
Screen program transfer |
Fixed the defect: When transferring a screen program (reading) via Ethernet communication, communication may not be possible with the counterpart device if the device has a static TCP/IP because the first command is sent over UDP. |
● |
● |
● |
● |
| 2504H11 |
Multi-language import |
Fixed the defect: The editor may be terminated forcibly during multi-language importing if there is a deviation in the imported data. |
● |
● |
● |
● |
| 2504H12 |
Global overlap |
Fixed the defect: When a large file is being opened and the screen is switched over or being operated before loading of the file is completed, the value in the setting device memory address of the global overlap may become abnormal. |
● |
● |
● |
● |
| 2504H13 |
Component parts |
Fixed the defect: The position of a numerical data display on component parts may be deviated when [General Settings] -> [Overall drawing item] -> [Windows fonts (data display), Windows98 compatible] is selected. |
● |
● |
● |
● |
| 2504H14 |
Multi-language display |
Fixed the defect: When a language other than the first language is displayed and the first language is displayed after editing the string table from the settings of a lamp, the lamp text of the first language may not be displayed correctly. |
● |
● |
● |
● |
| 2504H15 |
External characters |
Fixed the defect: When a screen program that uses both external characters and component parts is opened, external characters are not displayed where they are used. |
● |
● |
● |
● |
| 2504H16 |
Multi-monitor |
Fixed the defect: When using multiple monitors vertically for extending the display, using the editor on a monitor other than the main monitor results in the color settings window and memory settings window to be displayed on the sub monitor. |
● |
● |
● |
● |
| 2504H17 |
Macro command editing |
Fixed the defect: An error is not detected even if a device memory address other than a multiple of 16 is set in the MOV macro. |
● |
● |
● |
● |
| 2504H18 |
Screen program comparison |
Fixed the defect: When comparing screen programs with a [1:n] PLC connection type, differences in station numbers that cannot be set are detected. |
● |
● |
● |
● |
| 2504H19 |
Alarm display parts |
Fixed the defect: When gothic or stroke fonts are used in a screen program, the point size setting is not displayed in the [Style] menu of an alarm display part with V8-compatability (version 5 style). |
● |
● |
● |
● |
| 2504H20 |
CSV import |
Fixed the defect: When a CSV file exported by [Tool] -> [Other] -> [Convert to CSV] -> [CSV Export] and then imported again after editing comments in the CSV file, comments may disappear or an error may occur. |
● |
● |
● |
● |
| 2504H21 |
Trend graph |
Fixed the defect: When attempting to convert a V7 screen program into a V9 screen program and the number of points on the horizontal axis exceeds 8000, the message “Cannot convert because there is a function that is not available on the selected model.” is displayed and conversion fails. |
|
● |
|
|
| 2504H22 |
Picture parts |
Fixed the defect: After a picture is placed, the aspect ratio cannot be fixed when resizing the picture. |
|
● |
● |
● |
| 2504H23 |
Expanded data sheet |
Fixed the defect: When a screen program with an expanded data sheet setting of [A4 Landscape] is opened, the area displayed on the editor is A4 portrait. |
● |
● |
● |
● |
| 2504H24 |
Numerical data display |
Fixed the defect: When [Auto-adjust the area according to the text size] is set to [None] or a numerical data display, the size of the frame changes if the decimal point is changed. |
● |
● |
● |
● |
| 2504H25 |
Improvement of vulnerability |
Fixed the defect: When an invalid screen program is opened, the editor is terminated due to an error. |
● |
● |
● |
● |
| ◆V10 series: System Program |
| No. |
Item |
Description |
Altered
Ver. |
OS
Ver. |
| 2540T01 |
Trend graph parts |
Fixed the defect: When a trend graph is enlarged in the Y direction and is scrolled using the scroll bar (horizontal), the reference position in the Y direction is shifted. |
1.400 |
| 2540T02 |
V8-compatible memory card |
Fixed the defect: When the V8-compatible memory card function is used, error 163 may occur when the V10 series unit is rebooted. |
1.400 |
| 2540T03 |
V8-compatible memory card |
Fixed the defect: When a “.mcd” file that was used for a V8 or older screen program is converted to “MCMHEAD.BIN” and “REC0000.BIN” using the editor and used with a V9/V10 screen program, the recipe information output device memory n+1 on the V10 series unit becomes “5” indicating that the memory card format and setting data do not match. |
1.400 |
| 2540T04 |
Messages |
Fixed the defect: Adjustment of line breaks and text positions using spaces for message boxes on the V10 series unit do not function correctly. |
1.400 |
| 2540T05 |
Local mode |
Fixed the defect: When the Local mode screen -> [Communication Settings] is displayed and the Ethernet connection PLC page is changed to the communication unit connection PLC page, the communication parameters still display the settings for the Ethernet PLC |
1.400 |
| 2540T06 |
Serial communication |
Fixed the defect: When the time-out time is very short, timeout errors and format errors may occur during serial communication with a PLC. |
1.400 |
| 2540T07 |
Emulator |
Fixed the defect: When the [SYSTEM] button is pressed on the V10 emulator, the storage viewer and data transfer viewer are displayed. |
1.400 |
| 2540T08 |
Printer |
Fixed the defect: Printing using Hewlett Packard’s HP LaserJet Pro M501 is not possible. |
|
| 2540T09 |
Ethernet TCP/IP communication |
Fixed the defect: When a disconnection request is received from a counterpart device in Ethernet TCP/IP connection, connection cannot be reestablished. |
1.400 |
| 2540T10 |
Stand-alone MES function |
Fixed the defect: When the stand-alone MES function is used, the value written as a “2-word, DEC-” numerical value may not be reflected correctly in the database. |
1.400 |
| 2540T11 |
Storage transfer |
Fixed the defect: When a screen program is transferred from MONITOUCH to storage by the [Display -> Storage] command on the [Storage Transfer] Screen in Local mode, and that program is transferred back to MONITOUCH using the [Display <- Storage] command, a subsequent attempt to execute the [Display <-> Storage] command will result in a data mismatch error. |
1.400 |
| 2540T12 |
Operation logs |
Fixed the defect: When a numerical data display value with a decimal point is output as a PDF file using the operation log function, the value is changed to one without a decimal point. |
1.400 |
| 2540T13 |
Windows fonts |
Fixed the defect: Message display parts that use Windows fonts may not actually be displayed using Windows fonts. |
1.400 |
| 2540T14 |
Ethernet TCP/IP communication |
Fixed the defect: When communicating with a PLC via Ethernet TCP/IP, the V10 series unit may freeze when reading PLC device memory according to an event timer macro. |
1.400 |
| 2540T15 |
Storage removal |
Fixed the defect: Although the [General Settings] > [Switch/Lamp] > [Clear the status of Storage Removal when switching a screen (V8 compatible)] checkbox is selected, the storage removal status is not canceled even if the screen is changed over after pressing a switch with [Function] set to [Storage Removal] and a drive specified. |
1.400 |
| 2540T16 |
Device memory map |
Fixed the defect: When the following settings are made on the device memory map, values are written shifted by one address.
- The transfer destination is a double-word device memory.
- The data type is double-word |
1.400 |
| ◆V9 series: System Program |
| No. |
Item |
Description |
Altered
Ver. |
OS
Ver. |
| 2540J01 |
Stand-alone MES function |
Fixed the defect: When the stand-alone MES function is used, the value written as a “2-word, DEC-” numerical value may not be reflected correctly in the database. |
3.200 |
|
| 2540J02 |
Storage transfer |
Fixed the defect: When a screen program is transferred from MONITOUCH to storage by the [Display -> Storage] command on the [Storage Transfer] Screen, and that program is transferred back to MONITOUCH using the [Display <- Storage] command, a subsequent attempt to execute the [Display <-> Storage] command will result in a data mismatch error. |
3.200 |
|
| 2540J03 |
USB camera |
Fixed the defect: When [Use Event Record Function] is set to [Yes], alarm server recording is enabled, and the specified monitoring device memory is on, the USB camera display many not function if the V9 series unit is turned on in that state. |
3.200 |
|
| 2540J04 |
Operation logs |
Fixed the defect: When a numerical data display value with a decimal point is output as a PDF file using the operation log function, the value is changed to one without a decimal point. |
3.200 |
|
| 2540J05 |
Windows fonts |
Fixed the defect: Message display parts that use Windows fonts may not actually be displayed using Windows fonts. |
3.200 |
|
| 2540J06 |
Ethernet TCP/IP communication |
Fixed the defect: When communicating with a PLC via Ethernet TCP/IP, the V10 series unit may freeze when reading PLC device memory according to an event timer macro. |
3.200 |
|
| 2540J07 |
Storage removal |
Fixed the defect: Although the [General Settings] > [Switch/Lamp] > [Clear the status of Storage Removal when switching a screen (V8 compatible)] checkbox is selected, the storage removal status is not canceled even if the screen is changed over after pressing a switch with [Function] set to [Storage Removal] and a drive specified. |
3.200 |
|
| 2540J08 |
Device memory map |
Fixed the defect: When the following settings are made on the device memory map, values are written shifted by one address.
- The transfer destination is a double-word device memory.
- The data type is double-word |
3.200 |
|
| 2540J09 |
Ethernet TCP/IP communication |
Fixed the defect: When a disconnection request is received from a counterpart device in Ethernet TCP/IP connection, connection cannot be reestablished. |
3.200 |
|
