Use [Displaying Screen Device].

* For V8-compatible screen programs, use [Read Area].

1. Check the [Displaying Screen Device] setting located at [System Setting] → [Hardware Setting] → [Control Area] in the screen program.
   
   
   
   
   
2. Set the screen number to [Displaying Screen Device].
   
   [Displaying Screen Device]
   
   
   
   This will change the screen to the set screen number.

If the [Control Area] menu is absent from the hardware settings

[Control Area] is not used for screen programs converted from V8 series and earlier models. In this case, change screens using [Read Area].

[Read Area] setting location

[System Setting] → [Hardware Setting] → [Read/Write Area] → [Read Area]

Command method for changing screens

Set the screen number of the target screen to "n+2" in [Read Area] and then turn ON the "n+1-14" bit in [Read Area].

For the example in the above figure

D00002 = 10             Set the target screen number to 10.
D00001-14 bit ON      Turn on the change trigger.