Fuji Electric Co.,LTD
Global
Hakko Electronics (Korea)
Select Region
  • Global
  • Europe
  • Japan
  • China
  • Asia
    • Taiwan
    • Korea
Print
Font Size
  • Small
  • Medium
  • Large
  • 홈
  • HMI
  • 회사 정보
  • » 제품 정보
  • » 서포트
  • » FAQ (에 의한 질문)
  • » 대리점
  1. 홈 >
  2. FAQ
V8/TS2060 series Error HKFAQ000108

date: 2021/7/27

Communication error "Timeout"

This error is displayed when the V/TS series does not receive an answer from a connected device (PLC, temperature controller, etc.) within the predetermined time after issuing a request to send.

 

[In cases where the error occurs before communication]

<Causes>

  1. The communication cable is not connected correctly or is disconnected.
  2. Communication settings on the V/TS series do not match those of the connected device.

 

<Solutions>

  1. Check the cable connection.
  2. Check that the selection of [Maker] and [Series] on the V/TS series is correct and that the communication settings including baud rate, data length, stop bit, and parity are the same between the connected device and the V/TS series.

     

V8/TS series

Setting location: V-SFT-6 editor [System Setting] → [Hardware Setting] → [PLCx Properties]



V7/V6 series

Setting location: V-SFT-5 editor [System Setting] → [PLC Communication] → [PLC Model], [Communication Parameter]
V8series|Communication error Timeout

V8series|Communication error Timeout

V8series|Communication error Timeout

 

[In cases where the error occurs during normal communication]

<Cause>

Data may be disrupted because of noise.

 

<Solution>

Provide protection against noise.

Was this page helpful?

Please cooperate with the questionnaire to make it better.

  • Back to FAQ top

FAQ by product

  • V10/V9 series

  • V8/TS2060 series

  • TELLUS and V-Server

Most searched FAQs

  • Communication error "Error code received"
  • I want to search where these buttons are used:
    - Screen Change-over buttons
    - Overlap Control buttons
  • Communication Error "Timeout"
  • "The port cannot be opened."
  • What PLC models can be connected?
To page top
  • » 제품에 관한 문의
  • » 영업 판매 문의
  • » 카탈로그 청구
  • » RoHS 지령에 대응

MONITOUCH

라인업
  • X1 SERIES
  • V10 SERIES
  • V9 SERIES
  • TECHNOSHOT
  • Web Machine Interface
  • Smart Editor
  • V-SFT
  • TELLUS and V-Server
서포트 »
  • 다운로드
  • 문의
  • 추천 주변기기
FAQ »
  • FAQ concerning MONITOUCH
대리점 »
  • Overseas distributors
  • » Privacy Policy
Copyright©2013 Hakko Electronics Co., Ltd. All Right Reserved