FAQ by product “V9 series”
Multiple words can be searched by entering them separated by spaces.
Error
- "The port cannot be opened."
- "Insert Storage in V9"
"Insert Storage in V10" - "Receive timeout"
- Setup Error
- Screen Program Error "Error : XX (XX : XXX)"
- Communication Error "Simulator: Timeout", "Simulator: Link down"
- Communication Error "Error code received"
- "An error has occurred (123)"
- A TCP connection cannot be established.
- Screen Data Error "Error: 161 (SRAM:x)"
- The error "It is beyond the limits of the data." occurs in the V-SFT error check during editing of a screen that connects to MICREX-SX.
- I want to connect to MICREX-SX but "Communication Error: Error Code received
" occurs. - "Screen No. Error"
- I cannot set the IP address to setup VPN connection.
- When the MICREX-SX PLC is connected via the SX bus, the V10/V9 series unit encounters a communication error ("Time-Out") at startup.
- Screen Data Error "Error:46"
- An error occurs in V-SFT when opening a screen program that connects to MICREX-SX
- "Line length over"
- "Editor is occupied by another port"
- The PLC device memory address for a part is garbled as "??" or is "blank".
- "Import file is not selected"
- "It is not possible to open this file because there is a function that is not able to use."
- "The size is too large to communicate."
- "Battery changeover required"
- Communication Error "Timeout"
Operation Troubles
- The time and date is not displayed correctly.
- When executing file comparison, screen programs were mismatching though they supposed to be the same.
- I do not want to show a status bar on the bottom right corner of V series screen.
- Negative values or decimal fractions cannot be entered with a keypad.
- Pressing the touch switch activates nothing or activates a position that deviates from the switch.
- The lamp lights up even though the bit in the lamp device memory is not ON (OFF).
- I have a communication problem between the V10/V9 and Mitsubishi Q series CPU via Ethernet unit.
- I have a communication problem between the V10/V9 and Mitsubishi QnU series CPU built-in Ethernet.
- The V series does not recognize the storage device.
- The data for a trend part ([Display Mode: Real Time Display]) differs from the latest data in the PLC.
- The graph of a trend part (Display Mode: Real Time Display) is not displayed.
- When downloading, the message "xxxxxx.exe isn’t commonly downloaded." is displayed and download fails.
- The POWER LED does not light up or flashes.
- Pressing the reset switch does not clear history data.
- Alarms are not saved in the alarm history as specified for [Number of Data to Save] in the alarm server settings.
- A screen in multiple languages is created; however, the displayed language cannot be switched.
- Device address display is too long to see each address correctly while editing screens. Can I make the address display shorter?
- Messages are not displayed in the alarm tracking display.
- Cannot make entries with a keypad.
- Characters are not displayed in character display parts as intended.
- Pressing a switch does not activate anything.
- When a screen with an overlap display is switched to another and is switched back, the overlap part disappears.
- Overlap editing is disabled.
- The V series does not switch from the RUN screen to Local mode.
- Ladder transfer cannot be performed properly.
- I want to show a multi-overlap using a button but the overlap does not appear.
- I want to show a multi-overlap using PLC command but the overlap does not appear.
- I want to show a multi-overlap using macro command but the overlap does not appear.
Questions about
- I want to capture video of the state before and after an error occurs using a camera and save the video to file.
- I want to connect a camera and display video on MONITOUCH
- How to add data sheets to the same PDF file when outputting data sheets as PDF files
- How to switch between English and Japanese
- How to copy a V10/V9 screen program to older models
- How to clean and disinfect the touch panel surface
- I want to replay a motion picture.
- How to display the PC screen on the V series
- How to replace a discontinued the MONITOUCH unit
- How to update the operating system for the V series unit
- How to change the start-up screen (splash screen)
- How to specify the number of the initial screen upon powering-on
- How to prohibit setting changes in Local mode
- How to change communication setting such as [Signal Level] and [Baud Rate]
- How to change the setting for buzzer sound when a swich is pressed.
- How to change setting for the backlight
- How to make the screen dark when it is left untouched for a preset time
- How to connect two temperature controllers/inverters from different manufacturers
- How to check the operation of created screens without using the unit
- Can I connect V10/V9 only with a temperature controller without connecting any PLC?
- How to check the operation of screens without connecting to a PLC
- I want to install a viewer software on a VNC client.
- I want to disconnect my VNC client from the V10/V9.
- What can I do with VPN function?
- Can I reflect the settings in a screen program to change the local screen settings?
- I want to extend the USB port to the front panel of the control box.
- Can I register texts in advance and use them for switch/lamp/text on the screen?
- I want to download only the changes I made on my screen program to make the data transfer time time shorter.
- How to read data from a storage device that is inserted in the V series
- How to store screen data in a storage device
- I want to check connection status of the VNC client on my V10/V9.
- I want to check network connection of Ethernet.
- I want to have scrolling alarm messages on my screen.
- How to check the communication condition between the temperature controller and the V series
- How to display screens in foreign languages
- How to set (correct) the calendar
- How to remove storage devices safely from the V10/V9 series unit
- How to configure two-point pressing
- How to change the volume setting of the buzzer sound when the switch is pressed.
- How to sound a buzzer according to a command from the PLC (external)
- How to display overlap parts from the PLC (external)
- How to check the number of the screen currently displayed
- How to change-over the screen according to a PLC (external) command
- How to make a switch work only when the switch is held down
- How to provide a numerical data entry feature using a keypad
- I want to output error check results to a file.
- How to search for device memory addresses specified for items used on the screen
- How to save logging data even after turning off power to the V series
- How to copy a screen from one file to another
- How to read or write data between the temperature controller/inverter and the PLC device memory or internal device memory at regular intervals
- How to limit the values that can be entered through the keypad
- How to designate entry targets in which data can be entered
- How to draw reference lines for a trend graph part
- How to save logging data to a csv file
- How to give headings to logging data output to CSV files
- How to check whether or not a storage is recognized
- Can I use VPN function for free?
- I want to generate logging data in CSV at the determined time every day.
- I want to create a flow chart screen but it is too large to fit in single screen.
- Can I add transition effects to my screens or pop-up windows when they appear?
- How to paste an image of the created screen into another application like Microsoft Word / Excel
- How to find or replace text used in screen data
- How to change the design of a part placed on the screen
- How to disable switches on the base screen and other overlap parts while an overlap part is displayed
- How to hide overlap parts from the screen while editing the base screen
- How to overlay one switch on another on the screen
- How to assign a function to each function switch
- I want to import a image file to place it on a screen.
- How do I place a screen library on a screen?
- I want to search where a screen library is used.
- I want to change texts by the change in bit state.
- I want to create a transparent button so that only texts on the button changes when its ON/OFF state changes.
- I want to search where a macro block is used.
- Can I make a backup of the local screen settings?
- Can I make my macro commands more visible and easy to understand?
- How to print screen images with device memory addresses displayed on switches, etc.
- Can I check where on the screen the multi-overlap I made is displayed on V-SFT?
- Can I zoom in the screen image?
- How to adjust the brightness of the screen
- I want to use a tablet PC to monitor and operate V10/V9 screens.
- How to display multiple lines on a trend part asynchronously
- Can I browse PDF files on V10/V9?
- Can I output data sheet in softcopy?
- How to indicate battery trouble of the V series on the PLC side
- Can I display previous trends/alarms on the HMI?
- I want to search where these buttons are used:
- Screen Change-over buttons
- Overlap Control buttons
Product Specifications
- How far is it possible to communicate wirelessly?
- Is there a model without function switches?
- Can I purchase mounting fixtures?
- Are there any products available for use in tropical wetlands?
- What types of cables can be used for screen program transfer?
- Which version of the screen configuration software is supported by each MONITOUCH model?
- Are there any models without logos?
- What are the types and sizes of protective sheet?
- Which model comply with marine approvals?
- Is the backlight replaceable?
- How long will the backlight last?
- What standards is V10/V9 series compliant with?
- How do I install or update configuration software "V-SFT-6"?
- Operating system requirements and environment for configuration software "V-SFT-6"
- I want to know the contents of V-SFT Ver. 6 update.
- How to replace a Fuji Electric UD series unit with a MONITOUCH
- Which models are compliant with UL standards?
- Which models are equipped with wireless LAN access point?
- How long will the battery last?
- Which models are compliant with NEMA standards?
- What is the model name of a replacement battery?
- Which type of Monitouch can I edit with V-SFT Ver. 6?
