Fuji Electric Co.,LTD
Global
Hakko Electronics (Korea)
Select Region
  • Global
  • Europe
  • Japan
  • China
  • Asia
    • Taiwan
    • Korea
Print
Font Size
  • Small
  • Medium
  • Large
  • 홈
  • HMI
  • 회사 정보
  • » 제품 정보
  • » 서포트
  • » FAQ (에 의한 질문)
  • » 대리점
  1. 홈 >
  2. FAQ
V8/TS2060 series Error HKFAQ000117

date: 2021/8/2

"System Error xx"

This error is displayed when a system error (system crash) is detected.

 

[In cases where the error occurs during normal communication]

<Causes>

  1. System program crash due to noise
  2. Hardware problem
  3. Faulty system program

 

<Solutions>

TS/V8 series

Check if the situation is restored by restarting or by turning the power off and on.
If not restored, record the following three numbers that are displayed on the [System Error] screen and contact your HAKKO representative.

  • Screen No.
  • Error Code
  • [More Info] → All error codes

 

V7 series
Check if the situation is restored by turning the power off and on.
If not restored, record the following two numbers that are displayed on the [System Error] screen and contact your HAKKO representative.

  • System Error No.
  • Entire list of error codes

 

[When the error occurs immediately after screen data transfer and disables running]

<Cause>

Screen data may be corrupted.

 

<Solution>

Delete the data portion added or modified to the screen data, and transfer data again. If restored, the added or modified data portion contains the cause of the error.
Reconfigure the data portion newly.
If the error is not cleared, record the following numbers that are displayed on the [System Error] screen and contact your HAKKO representative.

 

TS/V8 series

  • Screen No.
  • Error Code
  • [More Info] → All error codes

 

V7 series

  • System Error No.
  • Entire list of error codes

 

Click here for product inquiries.

Was this page helpful?

Please cooperate with the questionnaire to make it better.

  • Back to FAQ top

FAQ by product

  • V10/V9 series

  • V8/TS2060 series

  • TELLUS and V-Server

Most searched FAQs

  • Communication error "Error code received"
  • I want to search where these buttons are used:
    - Screen Change-over buttons
    - Overlap Control buttons
  • Communication Error "Timeout"
  • "The port cannot be opened."
  • What PLC models can be connected?
To page top
  • » 제품에 관한 문의
  • » 영업 판매 문의
  • » 카탈로그 청구
  • » RoHS 지령에 대응

MONITOUCH

라인업
  • X1 SERIES
  • V10 SERIES
  • V9 SERIES
  • TECHNOSHOT
  • Web Machine Interface
  • Smart Editor
  • V-SFT
  • TELLUS and V-Server
서포트 »
  • 다운로드
  • 문의
  • 추천 주변기기
FAQ »
  • FAQ concerning MONITOUCH
대리점 »
  • Overseas distributors
  • » Privacy Policy
Copyright©2013 Hakko Electronics Co., Ltd. All Right Reserved