The causes and solutions are explained for cases where the following parts are used.

TS/V8

Graphic

V7 Series

Graphic Relay

Graphic

<Causes>

1. Parameter settings for graphics are not configured for graphic libraries.
2. The parameter area is not allocated in the [Graphic] or [Graphic Relay] dialog.

<Solutions>

TS/V8

1. Click the graphic (example: box) on the graphic library edit window, and configure the setting for [Parameter Setting] in the dialog.
   
   * The [Parameter Setting] tab window varies depending on the selected item type.
   For more information, refer to the Operation Manual.

    

2. Specify the total number of parameters provided to the graphics in the [Graphic]  dialog.
   From this total and parameter numbers, the memory allocation is determined.

  Setting location:  [Graphic] dialog→[Graphic Select]

V7Series

1. Click the graphic (example: box) on the graphic library edit window, and configure the setting for [Parameter Setting] in the dialog.
   
   * The [Parameter Setting] tab window varies depending on the selected item type.
   For more information, refer to the Operation Manual.

    

2. Specify the total number of parameters provided to the graphics in the [Graphic] or [Graphic Relay] dialog.
   From this total and parameter numbers, the memory allocation is determined.

Graphic mode:
Setting location: [Graphic] icon → [Graphic] dialog

Graphic relay mode:
Setting location: [Graphic Relay] icon → [Graphic Relay] dialog