<Causes>

1. The set word count for [Memory Card Emulation Area] is too small.
2. There is no memory card mode icon.

<Solutions>

1. Select [System Setting] → [Unit Setting] → [SRAM/Clock] → [Memory Card Emulation Area], and specify a value greater than [Word Count] for [Set Word].
   
   Example: When the used word count is "5000", set "5000" or more for the set word count.
   
   
   
2. Select [Parts] → [Catalog] → [Parts:Memory Card] →［Group:FormatSwitch], and place a new switch on the screen.

In the case of the V8/TS series, the "Card Format" switch is not necessary. This switch is valid for the following cases. [Buffering Area Setting] → [Secondary storage target: Memory Card]　　 In the memory card mode, [Memory Card Setting] → [Type: Data File]