Fuji Electric Co.,LTD
Global
Hakko Electronics (Korea)
Select Region
  • Global
  • Europe
  • Japan
  • China
  • Asia
    • Taiwan
    • Korea
Print
Font Size
  • Small
  • Medium
  • Large
  • 홈
  • HMI
  • 회사 정보
  • » 제품 정보
  • » 서포트
  • » FAQ (에 의한 질문)
  • » 대리점
  1. 홈 >
  2. FAQ
V8/TS2060 series Questions about HKFAQ000164

date: 2021/10/8

How to display overlap parts from the PLC (external)

There are four overlap part types.

  • Normal overlap
  • Call-overlap
  • Multi overlap
  • Global overlap

In the case of external commands, the display method differs.

 

[Normal/call overlap]

Two methods are available.

 

<Using the read area>

The overlap part will be displayed when bit 0 to 2 of read area "n + 1" corresponding to the desired overlap ID number is turned ON.
V8series|How to display overlap parts from the PLC (external)

 * For details about how to check Read area, click here. 

 

<Using the control device memory>

Check [Control Device] in the [Overlap] dialog on the V-SFT-6 editor.
The overlap part will be displayed when bit 0 of the specified cotrol device memory is turned ON.

Example: Normal overlap

 

[Multi/Global overlap]
Two methods are available.

 

<Using the read area>

  1. Display the [Overlap] dialog or select [System Setting] → [Global Setting] → [Global Overlap Setting], and select [Display Method: Control Device] on the V-SFT-6 editor.
    Set the PLC device memory for [Info Output Device].
    A device memory address is set for [Device Overlap Library No. to Display] (= information output device "n + 1").
    (The overlap library number to be displayed is stored in this device memory address.)

    Example: Multi-overlap

     

    Contents of info output device

    Device Contents Operation
    n The overlap library number of the multi/global overlap part currently displayed on the screen is stored.
    When no overlap display is shown, "-1" is stored.
    V/TS→PLC
    n+1 Specify the overlap library number to be displayed. V/TS←PLC
    n+2 * Specify the X coordinate of the multi/global overlap display. V/TS←PLC
    n+3 * Specify the Y coordinate of the multi/global overlap display. V/TS←PLC
    * Valid when the [Specify the display position by device] is checked.

     

  2. The overlap part will be displayed when the bit of read area "n + 1" corresponding to the desired overlap ID number is turned ON.
    - Multi overlap: Bit 0 to 2 of read area "n + 1"
    - Global overlap: Bit 3 of read area "n + 1"
    V8series|How to display overlap parts from the PLC (external)

* For details about how to check Read area, click here. 

 

<Using the control device memory>

  1. Display the [Overlap] dialog or select [System Setting] → [Global Setting] → [Global Overlap Setting], and select [Display Method: Control Device] on the V-SFT-6 editor.
    Set the PLC device memory for [Info Output Device].
  2. Check [Control Device].
  3. A device memory address is set for [Device Overlap Library No. to Display] (= information output device "n + 1").
    (The overlap library number to be displayed is stored in this device memory address.)

    Example: Multi-overlap

    * For more information of the Info Output Device, refer to the "Contents of info output device" above.

  4. The overlap part will be displayed when the number to display is set for [Device Overlap Library No. to Display] set in step (1) and bit 0 of the control device memory is turned ON.

     

     

Was this page helpful?

Please cooperate with the questionnaire to make it better.

  • Back to FAQ top

FAQ by product

  • V10/V9 series

  • V8/TS2060 series

  • TELLUS and V-Server

Most searched FAQs

  • Communication error "Error code received"
  • I want to search where these buttons are used:
    - Screen Change-over buttons
    - Overlap Control buttons
  • Communication Error "Timeout"
  • "The port cannot be opened."
  • What PLC models can be connected?
To page top
  • » 제품에 관한 문의
  • » 영업 판매 문의
  • » 카탈로그 청구
  • » RoHS 지령에 대응

MONITOUCH

라인업
  • X1 SERIES
  • V10 SERIES
  • V9 SERIES
  • TECHNOSHOT
  • Web Machine Interface
  • Smart Editor
  • V-SFT
  • TELLUS and V-Server
서포트 »
  • 다운로드
  • 문의
  • 추천 주변기기
FAQ »
  • FAQ concerning MONITOUCH
대리점 »
  • Overseas distributors
  • » Privacy Policy
Copyright©2013 Hakko Electronics Co., Ltd. All Right Reserved