Two methods are available. Follow the steps below.

[Storing data from a PC (V-SFT) to a storage device]

1. Click [File] -> [Storage Manager].

    

2. Specify the drive where the storage device is inserted and click [OK].
   The [Storage Manager] window is displayed.
   

    

3. Click [Write to Storage].
   Select the screen data from [Open] and click [OK].
   
   * When writing screen data that is being edited, check [Write Data Being Edited].

    

4. Writing starts.
   Screen data will be written as a BIN file in the DSP folder in the access folder (default: EXT0000) on the storage device.
   

    

   If the screen data file is copied onto the CF card, the V series cannot recognize the file. Be sure to write data as described above.

    

[Storing data from the V series to a storage device]

1. Switch to Local mode and press [Storage Transfer] in the menu icons.

    

2. The Storage Transfer screen is displayed.
   Configure the following settings and press [OK].
   
   • [Transfer Menu: Display --> Storage]
   • [Data Selection: Screen Data]
   

    

3. The following screen is displayed. Press [Start].
   

    

4. When the data has been transferred successfully, the [Work normally finished.] dialog is displayed.
   Press the [OK] switch.
   
   Screen data will be written as a BIN file in the DSP folder in the access folder (default: EXT0000) on the storage device.