1. Home >
  3. Lineup > TS2000 series >
  4. TS2060/2060i Series

Product information page of Programmable Display TECHNOSHOT TS2000 Series

Compact and highly functional

TS2000 series

  • 5.7 inches
  • QVGA
  • 64K color
  • TFT
  • LED
  • 2ch serial
  • USB miniB
  • CE
  • KC
  • UL

High-performance model SVGA 65,536 colors


  • USB A
  • SD Card
  • Ethernet
  • Comm unit


  • Specifications
  • Dimensions
  • System Configuration

Basic specifications

Power supplyRated voltage24VDC
Permissible range of voltage24VDC ± 10%
Permissible momentary power failureWithin 1ms
Demand (maximum rating)13W or less
Insulation resistance Between DC external terminal and FG: 500VDC 10MΩ or more
Physical environment Ambient temperature0 degC ~ +50 degC *1
Ambient humidity85%RH or less (without dew condensation) *1
Operation altitude2,000 meters or lower
AtmosphereNot to be exposed to corrosive gas, or conductive dust
Storage temperature-10 ~ 60 degC *1
Storage humidity85%RH or less (without dew condensation) *1
Overvoltage categoryCategory II
Contamination levelLevel 2
Mechanical operating conditions Resistance to oscillationComplies with JIS B 3502 (IEC61131-2) Vibration frequency: 5-9Hz, pulsating with:3.5mm, 9-150Hz, Acceleration: 9.8m/s2(1G),X,Y,Z: 3 directions (10 times each)
Resistance to shockComplies with JIS B 3502 (IEC61131-2) Peak acceleration: 147m/s2(15G), X,Y,Z: 3 directions, three times each (18 times in total)
Electric operating conditions Resistance to noiseNoise voltage: 1,000Vp-p, pulse width: 1μs, pulse rise time: 1ns
Resistance to static dischargeComplies with IEC61000-4-2, contact: 6kV, air: 8kV
Installation conditions GroundingGrounding resistance: Less than 100Ω, FG/SG separation
Protection StructureFront panel: Complies with IP65 (when waterproof gasket is installed) Rear cover: Complies with IP20
Installation methodPanel mounting
Cooling systemNatural air cooling
Dimensions W*H*D(mm)182.5 x 138.8 x 45.8mm
Panel cutout (mm)174.0(-0,+0.5) x 131.0(-0,+0.5) mm (same as V806/V606e)
Case color Black
BatteryCoin type lithium battery, lifetime: 5 years (ambient temperature 25 degC)
Material PC
  • *1: Wet-bulb temperature should be 39°C or lower to prevent malfunction.

Performance specifications

Screen program memory (FROM)2.5MB10.5MB
Backup memory (SRAM)128KB512KB
Stroke fontsN/ASupported
DisplayDisplay deviceTFT color
Resolution320 x 240
Display size5.7" (QVGA)
Colors65,536 colors (selection of 32K/256/128/monochrome available with software configuration.)
Backlight lifetime50,000 hours
Touch switchTypeAnalog resistance film
Function switchesNumber of the function switches6
External interfaceD-Sub 9-pin *2N/ARS-232C/ RS-422/485, Asynchronous type, Data length: 7, 8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps
Modular 8-pin(MJ1/MJ2)RS-232C/ RS-422 (4-wire) *3, RS-485 (two-wire), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500 bps *4
SD cardN/A1 slot, as standard equipment (SD/SDHC card)
EthernetN/A1CH, 100Mbps/10Mbps
USBType mini-B(Ver.2.0)Type A、Type mini-B(Ver.2.0)
Communication unitN/ACUR-xx supported
ClockBackup period5 years (Ambient temperature 25 degC)
Calendar accuracyW/ power supply: gap ±210 sec. per month (Ambient temperature 25 degC) W/o power supply: gap ±90 sec. per month (ambient temperature 25 degC, when battery backup is used.)
StandardsCEEN61000-6-2, EN61000-6-4
UL/cULUL61010-1, UL61010-2-201
  • *2: Available only when DUR-00 is attached to TS2060i.
  • *3: Only MJ2 supports 4-wire system.
  • *4: 187500bps is available only when connected with SIEMENS MPI/PPI . MPI/PPI connection is supported only with MJ2.

Outline drawing of TS2060/TS2060i


TS2000 series

Dimensions and Part Names

(Unit: mm)

TS2000 series
Part Names
  1. 1Display
  2. 2Power lamp
  3. 3Function switches
  4. 4SD card connector(SD)*
  5. 5Battery holder
  6. 6Communication interface unit connector(EXT1)*
  7. 7DIP switch
  8. 8USB mini-B(U-B)
  9. 9USB cable fixing hole
  1. 10Slide switch
  2. 11Terminal block
  3. 12Communication FG terminal
  4. 13USB-A(U-A)*
  5. 14Modular jack(MJ1)
  6. 15Modular jack(MJ2)
  7. 16100BASE-TX/10BASE-T connector(LAN)*
  8. 17Screw hole

* Only TS2060i.

System configuration of TS2060/TS2060i




TS2000 series
TS2000 series