List of TS2000 Series Accessories

Configuration Tool

V-SFT-6 (configuration software)

Application software for editing screen programs.

Supported operating systems:
Windows XP, XP 64 Edition, Vista (32-bit, 64-bit), 7 (32-bit, 64-bit), 8 (32-bit, 64-bit),8.1 (32-bit, 64-bit), 10 (32-bit, 64-bit)

V-CP (screen program transfer cable) 3 m

A cable used for connecting the TS2060 unit to a PC.

Optional Units

DUR-00

An optional unit for adding a D-sub 9-pin connector to the TS2060 unit.
* This unit cannot be used together with a “CUR-xx” communication interface unit.
* The optional “DUR-00” unit is only available for the TS2060i unit.

Communication Interface Units

CUR-xx

Communication units used for connecting to networks.
* These units cannot be used together with the optional “DUR-00” unit.
* “CUR-xx” communication interface units are only available for the TS2060i unit.

• CUR-00 → OPCN-1
• CUR-01 → T-Link
• CUR-02 → CC-Link
• CUR-03 → Ethernet
• CUR-04 → PROFIBUS-DP
• CUR-06 → SX-BUS
• CUR-07 → DeviceNet
• CUR-08 → FL-net

Cables

V6-BCD (barcode reader connection cable) 3 m

A cable used for connecting a barcode reader unit to the TS2060 unit.

V6-MLT (multi-link2 master cable) 3 m

A cable used for multi-link2 connection between a TS2060 master station and TS2060 slave station.

V6-TMP (connection cable for controllers)

A cable used for connecting the TS2060 unit to each controller.
V6-TMP: 3 m
V6-TMP-5M: 5 m
V6-TMP-10M: 10 m

D9-D25 (D-sub 9-pin-to-25-pin conversion cable) 0.3 m

A conversion cable used for connecting the communication cable for CN1 (D-sub 25-pin) of the V6/V7 series to CN1 (D-sub 9-pin) of the TS2060 unit.
This cable is used together with the optional “DUR-00” unit.

MJ2-PLC (MJ2-to-D-sub conversion cable) 0.3 m

This cable is used for connection to MJ1/2 on the TS2060 unit via RS-232C, or MJ2 on the TS2060 unit via RS-422 (4-wire connection).
This cable is used together with the communication cable used for CN1 (D-sub 25-pin) of theV6/V7 series.

* Use the MJ-D25 cable (see below) when connecting to a PLC via RS-485 (2-wire connection).

MJ-D25 (MJ-to-D-sub conversion cable) 0.3 m

This cable is used for connecting to MJ1/2 on the TS2060 unit via RS-232C or RS-485 (2-wire connection).
This cable is used together with the communication cable used for CN1 (D-sub 25-pin) of the V6/V7 series.

UA-FR (for USB-A port) 1 m

A cable for USB-A (master) that allows connection from the front of the control cabinet.
* The “UA-FR” unit is only available for the TS2060i unit.

Protective Sheets

V906T-GS

A sheet used for protecting the operation panel surface (5 pcs./set).

V906T-GSN10

A sheet used for protecting the operation panel surface (5 pcs./set, anti-glare treatment).
This sheet is colored light gray and the graininess of its surface prevents light reflection.

Other Options

TS-BT (replacement battery)

A replacement lithium battery for the TS2060 unit.
(CR2032W manufactured by Sony Energy Devices)

TC-D9 (terminal converter)

This converter is used for connecting the TS2060i unit to a controller at the RS-422/485 terminal block via CN1 (D-sub 9-pin) of the optional “DUR-00” unit.