Home >
V9 >
V9 Advanced Lineup > V9101iW series >
V9101iW series

Product information page of Programmable Display V9101iW Series

V9101iW
series

V9101iWRLD

V9101iWLD

Product
specifications
Interface / Dimensions and Part Names
System
Configuration
Model

Dimensions and Part Names

Item		V9101iW
Power supply	Rated voltage	24V DC
	Permissible range of voltage	DC: ±10%
	Permissible momentary power failure	DC within 1ms
	Demand (maximum rating)	DC: 27W or less
Insulation resistance		DC500V 10MΩ or more
Physical environment	Ambient temperature	0～50℃ ^*1
	Ambient humidity	85%RH or less (without dew condensation) ^*1
	Operation altitude	2,000 meters or lower
	Atmosphere	Not to be exposed to corrosive gas, or conductive dust
	Storage temperature	-10～60℃ ^*1
	Storage humidity	85%RH or less (without dew condensation) ^*1
	Overvoltage category	Category II
	Pollution degree	Pollution degree 2
Mechanical operating conditions	Resistance to oscillation	JIS B 3502 (IEC61131-2) compliant, Vibration frequency 5 to 9Hz, Half amplitude: 3.5mm, 9 to 150Hz, Constant acceleration: 9.8m/s2 (1G), X, Y, Z 3 directions 10 times each
Mechanical operating conditions	Resistance to shock	JIS B 3502 (IEC61131-2) compliant, Peak acceleration: 147m/s2 (15G), X,Y,Z 3 directions, 3 times each (18 times in total)
Electric operating conditions	Resistance to noise	Noise voltage: 1,000Vp-p, pulse width: 1μs, pulse rise time: 1ns
Electric operating conditions	Resistance to static discharge	Complies with IEC61000-4-2, contact: 6kV, air: 8kV
Installation conditions	Grounding	Grounding resistance: Less than 100Ω, FG/SG separation
	Structure	Front case: IP66, Type 4X/13^*2(when water-proof gasket is used), Rear case: IP20, single unit, installation method: panel mounting
	Cooling system	Natural air cooling
	Dimensions WHD (mm)	278.5×198.5×53.2
	Panel cutout (mm)	257.0×183.0 (+0.5/-0)
	Weight (display only)	Approx. 1.7 kg
Case color		Light gray
Material		PC

*1: Use at a wet-bulb temperature of 39°C or less because higher temperatures may cause failure.

Performance Specifications

Item		V9101iW
Screen memory (FROM)		64MB
Backup memory (SRAM)		800KB
Display	Display device	TFT color LCD
	Resolution	1024×600
	Display size	10.1″
	Colors	16.7 million ^*3
	Backlight	LED
	Backlight life	50,000 hours
Touch switch	Type	Capacitance
External interface	D-Sub 9-pin (CN1)	RS-232C/ RS-485(2-wire system)/ RS-422(4-wire system), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200, 187500^*4bps
	Modular 8-pin (MJ1/MJ2)	RS-232C/ RS-485(2-wire system), Asynchronous type, Data length: 7,8 bits, Parity: even, odd, none, Stop bit: 1, 2 bits, Baud rate: 4800, 9600, 19200, 38400, 57600, 76800, 115200 bps
	SD card	One card slot provided as standard
	Ethernet	2ch, Baud rate: 100Mbps, 10Mbps
	Wireless LAN	Complies with IEEE802.11b/g/n(2.4GHz)^*5
	USB	Type A,Type mini-B(Ver.2.0)
	Sound output	1ch provided as standard
Clock	Backup period	5 years (Ambient temperature 25°C)
Clock	Calendar accuracy	Gap ±90 sec. per month (Ambient temperature 25°C, when power is not supplied)
Standard	CE marking	EN61000-6-2,EN61000-6-4
	UL･cUL	UL61010-1/UL61010-2-201(E313548)^*6
	KC	Compliant
	Radio Act ^*5	Japan:TELEC USA:FCC Canada:IC RSS Europe:RE South Korea:KC
Classification Standard		-

*2: Hardware of Ver. c or later
*3: For displaying pictures, 3D parts, video, and RGB input (excluding high-speed mode) only. Other parts are displayed in 65,536 colors.
*4: Only for Siemens MPI (Incompatible with DUR-00).
*5: Wireless LAN-compatible products only.
*6: Only for Hardware Ver. f or later. Applicable standard for Hardware Ver. a to e is UL 508.